DPC Module:DPC under Windows

From LEXWiKi

(Difference between revisions)
Jump to: navigation, search
(New page: Category:AllowPages == DPC Module Spec == == The Sample code source you can download form == Source file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/DPC_release/Windows_base...)
(→How to use the DEMO application)
Line 8: Line 8:
== How to use the DEMO application ==
== How to use the DEMO application ==
-
[[Image:DPC_AP_1]]<br />
+
[[Image:DPC_AP_1.jpg]]<br />
-
[[Image:DPC_AP_2]]<br />
+
[[Image:DPC_AP_2.jpg]]<br />
-
[[Image:DPC_AP_3]]<br />
+
[[Image:DPC_AP_3.jpg]]<br />
-
[[Image:DPC_AP_4]]<br />
+
[[Image:DPC_AP_4.jpg]]<br />
-
[[Image:DPC_AP_5]]<br />
+
[[Image:DPC_AP_5.jpg]]<br />
#COM Port selection
#COM Port selection
#Open COM Port
#Open COM Port

Revision as of 13:50, 6 April 2009

Contents

DPC Module Spec

The Sample code source you can download form

Source file: DPCv2.4wSrc.rar

Binary file: DPC_v2.4w.rar

How to use the DEMO application

Image:DPC_AP_1.jpg
Image:DPC_AP_2.jpg
Image:DPC_AP_3.jpg
Image:DPC_AP_4.jpg
Image:DPC_AP_5.jpg

  1. COM Port selection
  2. Open COM Port
  3. Close COM Port
  4. UP line message
  5. LOW line message
  6. UP line message send to LCM device
  7. LOW line message send to LCM device
  8. Check LCM all pixel work

Sample code Introduction

Open COM Port Device

In Sample code /LCD_CTLDlg.cpp lin 157 

  if(m_SerialPort.InitPort(this,nPort,9600,'N',8,1,EV_RXFLAG|EV_RXCHAR,512)) //Set LCM to 9600.n.8.1
  {
  m_SerialPort.StartMonitoring(); //Open Com port monitoring
  m_bSerialPortOpened=TRUE; //Set COM port open 
  }

Close COM Port Device

In Sample code /LCD_CTLDlg.cpp lin 171 

  m_SerialPort.ClosePort(); //Set COM port close
  m_bSerialPortOpened=FALSE;

Send the UP line message to LCM Device

In Sample code /LCD_CTLDlg.cpp lin 183 

  if(!m_bSerialPortOpened) return; //check the com port was open
  UpdateData(TRUE);
  char szSend[30] = {0x1b, 0x51, 0x41}; //0x1b , 0x51 ,0x41 for LCM send UPline command
  sprintf(szSend+3, "%s\r", m_Sendmsg);
  m_SerialPort.WriteToPort(szSend); //Write command and message to LCM device

Send the LOW line message to LCM Device

In Sample code /LCD_CTLDlg.cpp lin 215 

  UpdateData();
  char szSend[30] = {0x1b, 0x51, 0x42}; //0x1b , 0x51 ,0x42 for LCM send LOWline command
  sprintf(szSend+3, "%s\r", m_Sendmsg2);
  m_SerialPort.WriteToPort(szSend); //Write command and message to LCM device

LCM Command list

Please check the page6 in spec file ,you can download form LCM-Spec

Retrieved from "http://tprd.info/lexwiki/index.php/DPC_Module:DPC_under_Windows"
Personal tools