請先看『使用說明』

From LEXWiKi

Current revision

The Sample code source bin you can download from

<Google Drive>

Binary file: DPC_v1.5L_Bin_x64

Binary file: DPConly_v2.1L_Bin_x64

<FTP>

Binary file: DPC_v1.5L_Bin_x64

Binary file: DPConly_v2.1L_Bin_x64

DPConly use manual

1. Enter Linux username

2. Enter Linux password

Use install to automatically open the program at boot

Use Uninstall to remove the automatic boot function

DPConly added that you can use the arrow keys to adjust the DPC brightness

Note: That DPConly does not have a lightsensor function

How to use the DPC Utility

1. If checked to save DPC setting , the setting of frequency and duty cycle will be reserved.

2. It will show the MCU version of DPC.

3. Frequency of panel selection.

4. Apply the frequency of panel which user selected.

5. Brightness control scrollbar, you can adjust volume of brightness.

6. Show the brightness value which you adjust.

7. When click the LightOff button, the panel will become darkness.

8. Reset the record of hot key and picked up area.

9. Click the button. User can pick up the area from object 13. When clicking area, the panel will be light on from darkness.

10. Click the button. User can set the hotkey. When push hot key, the panel will be light on from darkness.

11. First key of hotkey. Only enter Ctrl, SHIFT, or ALT.

12. Second key of hotkey. Only enter key: 'A' to 'Z'.

13. Apply the hotkey which user entered.

14. Pick up the area from panel. After clicking area, the panel will be light on from darkness.

15. If checked it. utility will adjust the volume of brightness automatically.

16. Light sensor device name.

17. The mode of light sensor in used.

18. The range of light sensor in used.

19. Calculated LUX values.

20. Advanced settings.

21. Choose which mode of light sensor to use.

22. Choose which range of light sensor to use.

23. Custom limit: light sensor maximum volume of brightness.

24. Custom limit: light sensor median volume of brightness.

25. Custom limit: light sensor minimum volume of brightness.

26. Save the setting value but without leaving the window.

27. Save the setting value and close the window.

28. Close the window and without saving.

Sample Code Introduction

Define SMBus register

#define SMBUSPORT		0x0500
#define	HST_STS			SMBUSPORT+0x00
#define	HST_CNT			SMBUSPORT+0x02
#define	HST_CMD			SMBUSPORT+0x03
#define	XMIT_SLVA		SMBUSPORT+0x04
#define	HST_D0			SMBUSPORT+0x05
#define bSize			1
#define SADD			0xb0
#define PWMFeq			0x01
#define PWMDuty			0x02

Set Frequency data

DWORD dwPortVal;
bool bResult;
bResult = InitializeWinIo();
if (bResult){
    SetPortVal(HST_STS, 0xFE, bSize); //start
    Sleep(20);
    SetPortVal(XMIT_SLVA, SADD, bSize); //set
    Sleep(20);
    SetPortVal(HST_CMD, PWMFeq, bSize); //set frequency
    Sleep(20);
    GetPortVal(HST_STS, &dwPortVal, bSize);
    Sleep(20);
    dwPortVal = dwPortVal & 0x01;
    if (dwPortVal == 0){
         SetPortVal(HST_D0, fvalue, bSize); //write data into frequency
         Sleep(20);
         SetPortVal(HST_CNT, 0x48, bSize); //stop
         Sleep(20);
         ShutdownWinIo();
    }
    else
         ShutdownWinIo();
}
ShutdownWinIo();

Set Duty Cycle

UpdateData(TRUE);
DWORD dwPortVal;
bool bResult;
bResult = InitializeWinIo();
if (bResult){
    SetPortVal(HST_STS, 0xFE, bSize); //start
    Sleep(20);
    SetPortVal(XMIT_SLVA, SADD, bSize); //set 
    Sleep(20);
    SetPortVal(HST_CMD, PWMDuty, bSize); //set duty
    Sleep(20);
    GetPortVal(HST_STS, &dwPortVal, bSize);
    Sleep(20);
    dwPortVal = dwPortVal & 0x01;
    if (dwPortVal == 0){
         if (inverter == false)
              SetPortVal(HST_D0, dvalue * 10 , bSize); //write data into data
         else if (inverter == true)
              SetPortVal(HST_D0, (10 - dvalue) * 10 , bSize); 
         Sleep(20);
  	   SetPortVal(HST_CNT, 0x48, bSize); //stop
         Sleep(20);
         ShutdownWinIo();
    }
    else
         ShutdownWinIo();
}
ShutdownWinIo();