請先看『使用說明』
Module:CC007 module
From LEXWiKi
(→How to Install F81534 driver) |
|||
| Line 70: | Line 70: | ||
| | | | ||
[https://drive.google.com/file/d/1thqF-n0J2Zp9iLjV2HhlWESMVfa2VgK0/view?usp=share_F81534 V1.24] | [https://drive.google.com/file/d/1thqF-n0J2Zp9iLjV2HhlWESMVfa2VgK0/view?usp=share_F81534 V1.24] | ||
| + | [https://drive.google.com/file/d/1rpVKSldyx0jXcmEwBtpMuY80DpESOGYX/view?usp=share_change mode] | ||
| + | |- | ||
| + | | | ||
| + | Ubuntu 22.04 | ||
| + | | | ||
| + | 6.5.0-28-generic | ||
| + | | | ||
| + | F81534 | ||
| + | | | ||
| + | F81534 V1.29s | ||
| + | | | ||
| + | [https://drive.google.com/file/d/1KTurda4VIXj3KFhas2pNDdixQRzIX0a4/view?usp=sharing V1.29s] | ||
[https://drive.google.com/file/d/1rpVKSldyx0jXcmEwBtpMuY80DpESOGYX/view?usp=share_change mode] | [https://drive.google.com/file/d/1rpVKSldyx0jXcmEwBtpMuY80DpESOGYX/view?usp=share_change mode] | ||
|-class='sortbottom' | |-class='sortbottom' | ||
Current revision
| OS | Kernrl | Module | Driver | Download! | |
|---|---|---|---|---|---|
|
Ubuntu 18.04.2 |
4.18.0-15-generic |
F81534 |
F81534 v1.24 | ||
|
Fedora33 |
5.9.14-200.fc33.X86_64 |
F81534 |
F81534 v1.25 | ||
|
Ubuntu 20.04 |
5.4.0-47-generic |
F81534 |
F81534 v1.24 | ||
|
OpenSUSE Tumbleweed 15.2 |
5.9.14-1-default |
F81534 |
F81534 v1.25 | ||
|
Debain 10.6 |
4.19.0-13-amd64 |
F81534 |
F81534 V1.24 | ||
|
Ubuntu 22.04 |
6.5.0-28-generic |
F81534 |
F81534 V1.29s |
How to Install F81534 driver
Fintek F81534 driver install
1.Prepare the kernel tree & compiler tools for your distribution.
#sudo su
#apt-get update
#apt-get install build-essential gcc
2.unzip driver zip file (F81534-532_DriverSourceCode-<version>_Linux.zip)
- cd F81534
- make clean ; make ; make install
- modprobe usbserial
- rmmod f81534 ; insmod f81534.ko
3.check new port added by “dmesg | grep ttyUSB”.
- reboot
How to use F81534-change Mode
1.unzip tool zip file
- make clean ; make
- you'll get set_mode&set_gpio in the same folder
2.Using demo application
3.Example
1. Change ttyUSB3 to RS232 Mode
- ./set_mode ttyUSB3 1
- ./set_gpio ttyUSB3 1
2. Change ttyUSB3 to RS485 Mode
- ./set_mode ttyUSB3 2
- ./set_gpio ttyUSB3 2
3. Change ttyUSB3 to RS422 Mode
- UART Mode is don’t care.
- ./set_gpio ttyUSB3 0
Notice:
RS485_1 / RS422_Term / RS232_coexist / RS485_Term / Shutdown mode are not test yet.(EVB)
Only test RS422(EVB)/RS232(EVB)/RS485(EVB).
