F81966 Watchdog Service under Windows

From LEXWiKi

(Difference between revisions)
Jump to: navigation, search
(New page: Category:AllowPages == The binary file you can download from == <Google Drive> Binary file(64 bit): [https://drive.google.com/file/d/1yGTJuPhhJ1C_VRS912JxhxVW3MkWTZNh/view?usp=shar...)
Current revision (15:55, 17 December 2024) (edit) (undo)
(→How to check service log message)
 
(6 intermediate revisions not shown.)
Line 12: Line 12:
== How to install Watchdog service tool ==
== How to install Watchdog service tool ==
 +
'''Step1. Click “setup” file to install watchdog service.'''<br />
 +
[[Image:WDT_S_AA00001-1.png]]<br /><br />
-
=== 測試項目摘要 ===
+
'''Step2. Keep Click ”Next” to complete the installation.'''<br />
-
'''軟體主介面，顯示選定的測試項目，可套用已製作的設定檔，套用設計好的測試規則'''<br />
+
[[Image:WDT_S_AA00002.png]]<br /><br />
-
[[Image:MAT_AA00001-1.png]]<br /><br />
+
-
=== 硬體資訊 ===
+
'''Step3. If service is successfully installed, service will auto start.'''<br />
-
'''軟體執行時，會自動掃描並列表主機板的BIOS及硬體訊息'''<br />
+
-
'''如果有安裝指定的mini card，軟體也會列出指定mini card的硬體訊息'''<br />
+
-
[[Image:MAT_AA00002.png]]<br /><br />
+
-
*1-1. BIOS版本號<br />
 
-
*1-2. Intel Management Engine版本號<br />
 
-
*1-3. CPU型號<br />
 
-
*1-4. 記憶體大小<br />
 
-
*1-5. CPU溫度<br />
 
-
*1-6. 系統溫度<br />
 
-
*1-7. HCI主機控制介面<br />
 
-
*1-8. TPM<br />
 
-
*1-9. TXE<br />
 
-
*1-10. NTP校時<br />
 
-
=== 生產資料 ===
+
== How to modify Watchdog timer setting ==
-
'''掃描製令編號、產品批號、測試人員工號的QR code條碼，作為產生報表的分類依據'''<br />
+
'''Step1. Click “LEX WDT CFG Editor” short cut on your desktop.'''<br />
-
[[Image:MAT_AA00003.png]]<br /><br />
+
[[Image:WDT_S_AA00003.png]]<br /><br />
-
'''掃描主機板上的QR code條碼，可從 MB_BarCode.ini中獲得主機板的MAC位址及網卡、COM、DIO的配置資訊'''<br />
+
'''Step2. Open editor there are 4 parameters can be setup.'''<br />
-
[[Image:MAT_AA00004.png]]<br /><br />
+
*1. COUNT MODE : Set WDT timer countdown unit is “second” or “minute”. The default setting is “second”.
 +
*2. COUNT TIME : How much time that system will reboot after system were crashed. The default setting is 2 seconds.
 +
*3. RELOAD : How much time that watchdog time would reload. The default setting is 1 seconds.
 +
*4. DO HIGH : How much time that DO pin turn to “HIGH” when windows logon (as pic2). The default setting is 35 seconds.
 +
[[Image:WDT_S_AA0004.png]][[Image:WDT_S_AA0005.png]]<br /><br />
-
=== 網卡雙工/設定IP ===
+
'''Step3. Press “OK” button to update setting.'''<br />
-
'''手動切換網卡雙工模式，以及批次修改網卡IP位址'''<br />
+
-
[[Image:MAT_AA0005.png]][[Image:Mb_AA0005-2.png]]<br /><br />
+
-
*2-1. 手動切換網卡的雙工模式<br />
 
-
*2-2. 批次修改主機板的所有網路卡IP address<br />
 
-
*2-3. NTP網路校時server位置<br />
 
-
選取狀態:預設連線位置為產線伺服器(192.168.1.1);<br />
 
-
非選取狀態:預設連線位置為GOOGLE NTP伺服器<br />
 
-
*2-4. 指定IP address範圍，順序批次修改至網卡中<br />
 
-
*2-5. 主機板網卡資訊: MAC位址、IP位址、目前為固定IP or 動態IP。如果網路有問題，顯示無效IP<br />
 
-
*2-6. 主機板網卡資訊: MAC位址、IP位址、目前為固定IP or 動態IP。如果網路正常，顯示正確IP位址<br />
 
-
=== 網卡 ===
+
== How to disable service process ==
-
'''網卡資訊、雙工網速及功能測試'''<br />
+
'''Step1. Open windows “Service.exe”, as shown below.'''<br />
-
[[Image:MAT_AA00006.png]]<br /><br />
+
[[Image:WDT_S_AA00006.png]]<br /><br />
-
'''可指定特定網卡進行特定的雙工網速及功能測試'''<br />
+
'''Step2. Find “LEX Watchdog Service” service. And right click to open menu and select “Properties” as shown below.'''<br />
-
*3-1. 可指定此次網卡要測試的雙工模式<br />
+
[[Image:WDT_S_AA00007.png]]<br /><br />
-
*3-2. 可指定是否檢查MAC位址的合法性。<br />
+
-
檢查OEM MAC:檢查是否符合LEX標準MAC or 客戶自定義MAC; <br />
+
-
檢查Barcode MAC:檢查是否符合主機板配置的MAC; <br />
+
-
檢查網卡驅動:檢查網卡驅動供應商是否符合INTEL <br />
+
-
*3-3. 網卡狀態資訊，顯示該網卡晶片、驅動、MAC位址、雙工網速測試結果<br />
+
-
=== DIO ===
+
'''Step3. Drop down “Startup type” menu. Select “Disabled” will freeze “LEX Watchdog Service”. Select “Automatic” service will start at system startup.'''<br />
-
'''GPIO晶片資訊，可測試指定CIO port DI/DO功能及WDT功能'''<br />
+
[[Image:WDT_S_AA00008.png]]<br /><br />
-
[[Image:MAT_AA00007-1.png]]<br /><br />
+
-
*4-1. GPIO晶片資訊，選擇主機板對應支援的CIO port類型<br />
+
'''Step4. Press “OK” button to update setting. And reboot your windows system.'''<br />
-
*4-2. 可指定是否測試WDT功能 及 測試指定的CIO port DI/DO功能<br />
+
-
*4-3. 可指定是否測試時，依照CIO1~CIO4的順序，依次進行測試，每完成一個CIO測試，需測試者確認按下'下一步'，才會進行下一個CIO測試<br />
+
-
*4-4. 可指定是否測試時，長時間觸發CIO1~CIO4的測試，直到測試者確認按下'完成'，才會結束測試<br />
+
-
=== COM ===
 
-
'''COM port功能測試，可支援"RS232"、"RS422"、"RS485"、"M303"'''<br />
 
-
[[Image:MAT_AA00008-1.png]]<br /><br />
 
-
*5-1. COM測試結果，同時以圖形方式顯示狀態<br />
+
== Uninstall Watchdog service tool ==
-
*5-2. 指定此COM port以何種協議去進行測試: 支援RS232、RS422、RS485<br />
+
'''Step1. Use the windows default “uninstall a program” tool. And uninstall “LEX Watchdog Service” as shown below.'''<br />
-
*5-3. 指定此COM port，是否以auto flow(RS232 to RS485)的方式去進行測試<br />
+
[[Image:WDT_S_AA00009.png]]<br /><br />
-
=== 測試完成結果(QR code) ===
+
'''Step2. During the software release process, if the following screen pops up, click “OK” as shown below.'''<br />
-
'''測試完成時，會產生各項目簡單測試結果視窗，並產生4個QR code，分別記載各項目的測試結果，'''<br />
+
[[Image:WDT_S_AA00010.png]]<br /><br />
-
'''配合"Auto Report Tool"可生成EXCEL報表'''<br />
+
-
[[Image:MAT_AA00009.png]]<br />
+
 +
'''Step3. Reboot your windows system to finish uninstall.'''<br />
-
=== 測試完成結果(Log) ===
 
-
'''測試完成時，會產生各項目簡單測試的Log文件，存放在特定目錄夾，可藉由工具將指定Log還原成QR code，'''<br />
 
-
'''配合"Auto Report Tool"生成EXCEL報表'''<br />
 
-
[[Image:MAT_AA000010.png]]<br />
 
-
*6-1. 展開存放Log文件的目錄夾位置<br />
+
== How to test service is working ==
-
*6-2. 選取指定Log檔案，還原成QR code<br />
+
'''Step1. Click “LEX WDT CFG Editor” short cut on your desktop.'''<br />
 +
[[Image:WDT_S_AA00011.png]]<br /><br />
-
[[Image:MAT_00002-7.png]]<br />
+
'''Step2. Modify “COUNT TIME” value less than “RELOAD” value. As a protection measure, SERVICE will be restored to the default value at the next restart to avoid unlimited restarts.'''<br />
 +
[[Image:WDT_S_AA00012.png]]<br /><br />
 +
 
 +
'''Step3. Wait watchdog timer active. If system reboot successfully, watchdog is working.'''<br />
 +
 
 +
'''Abnormal system restart may cause CFG to fail to be stored normally, please be careful.'''<br />
 +
 
 +
 
 +
== How to check service log message ==
 +
'''Step1. Open “Logs” folder from “LEX Watchdog Service” installed path. Default installed path is (“C:\Program Files\LEX\LEX Watchdog Service”).'''<br />
 +
[[Image:WDT_S_AA00013.png]]<br />
 +
 
 +
'''Step2. Find what date you want to check.'''<br />
 +
[[Image:WDT_S_AA00014-1.png]]<br />
 +
 
 +
'''Step3. When the status of service changes, it will be recorded in the log file.'''<br />
 +
[[Image:WDT_S_AA00014.png]]<br />
 +
 
 +
== How to fix “Error1001 ==
 +
[[Image:WDT_S_AA00015.png]]<br />
 +
 
 +
'''Step1. Open windows “Registry Editor”, as shown below.'''<br />
 +
[[Image:WDT_S_AA00016.png]]<br />
 +
 
 +
'''Step2. Expand the following path to find the Services directory layer.'''<br />
 +
'''HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\'''<br />
 +
[[Image:WDT_S_AA00017.png]]<br />
 +
 
 +
'''Step3. Find “LEX Watchdog Service”, right-click the menu and select “Delete”.'''<br />
 +
[[Image:WDT_S_AA00018.png]]<br />
 +
 
 +
'''Step4. Reboot your system. And reinstall “LEX Watchdog Service”.'''<br />

Current revision


Contents

The binary file you can download from

<Google Drive>

Binary file(64 bit): LEX_WatchDog_Service_Ver1.1.12.20

Manuual Guide: Manuual Guide


How to install Watchdog service tool

Step1. Click “setup” file to install watchdog service.
Image:WDT_S_AA00001-1.png

Step2. Keep Click ”Next” to complete the installation.
Image:WDT_S_AA00002.png

Step3. If service is successfully installed, service will auto start.


How to modify Watchdog timer setting

Step1. Click “LEX WDT CFG Editor” short cut on your desktop.
Image:WDT_S_AA00003.png

Step2. Open editor there are 4 parameters can be setup.

  • 1. COUNT MODE : Set WDT timer countdown unit is “second” or “minute”. The default setting is “second”.
  • 2. COUNT TIME : How much time that system will reboot after system were crashed. The default setting is 2 seconds.
  • 3. RELOAD : How much time that watchdog time would reload. The default setting is 1 seconds.
  • 4. DO HIGH : How much time that DO pin turn to “HIGH” when windows logon (as pic2). The default setting is 35 seconds.

Image:WDT_S_AA0004.pngImage:WDT_S_AA0005.png

Step3. Press “OK” button to update setting.


How to disable service process

Step1. Open windows “Service.exe”, as shown below.
Image:WDT_S_AA00006.png

Step2. Find “LEX Watchdog Service” service. And right click to open menu and select “Properties” as shown below.
Image:WDT_S_AA00007.png

Step3. Drop down “Startup type” menu. Select “Disabled” will freeze “LEX Watchdog Service”. Select “Automatic” service will start at system startup.
Image:WDT_S_AA00008.png

Step4. Press “OK” button to update setting. And reboot your windows system.


Uninstall Watchdog service tool

Step1. Use the windows default “uninstall a program” tool. And uninstall “LEX Watchdog Service” as shown below.
Image:WDT_S_AA00009.png

Step2. During the software release process, if the following screen pops up, click “OK” as shown below.
Image:WDT_S_AA00010.png

Step3. Reboot your windows system to finish uninstall.


How to test service is working

Step1. Click “LEX WDT CFG Editor” short cut on your desktop.
Image:WDT_S_AA00011.png

Step2. Modify “COUNT TIME” value less than “RELOAD” value. As a protection measure, SERVICE will be restored to the default value at the next restart to avoid unlimited restarts.
Image:WDT_S_AA00012.png

Step3. Wait watchdog timer active. If system reboot successfully, watchdog is working.

Abnormal system restart may cause CFG to fail to be stored normally, please be careful.


How to check service log message

Step1. Open “Logs” folder from “LEX Watchdog Service” installed path. Default installed path is (“C:\Program Files\LEX\LEX Watchdog Service”).
Image:WDT_S_AA00013.png

Step2. Find what date you want to check.
Image:WDT_S_AA00014-1.png

Step3. When the status of service changes, it will be recorded in the log file.
Image:WDT_S_AA00014.png

How to fix “Error1001

Image:WDT_S_AA00015.png

Step1. Open windows “Registry Editor”, as shown below.
Image:WDT_S_AA00016.png

Step2. Expand the following path to find the Services directory layer.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\
Image:WDT_S_AA00017.png

Step3. Find “LEX Watchdog Service”, right-click the menu and select “Delete”.
Image:WDT_S_AA00018.png

Step4. Reboot your system. And reinstall “LEX Watchdog Service”.

Retrieved from "http://tprd.info/lexwiki/index.php/F81966_Watchdog_Service_under_Windows"
Personal tools