MB:MV700A

From LEXWiKi

(Difference between revisions)

Current revision

1 Driver
2 FAQ for MV700A

Driver

O.S.	VGA Support	Audio Support	IDE Support	Video-in Support	TV-OUT Support	MPEG2 Accelerator	MPEG4 Accelerator	Download	Patch
Windows XP Embedded	Yes	Yes	Yes	Yes	Yes	Yes	Yes	VGA IDE Sound MPEG4 Filter	MPEG2 Accelerator depends on PowerDVD MPEG4 Accelerator support SDK for customer. 由於 D-sub 與 S-Video 在硬體設計上同走一條channel, 故在 TV-OUT 部分若接了 S-Video 便需要將 D-sub 給移除, 才不至於影響 S-Video 畫面(D-sub S-Video 兩者只能取其一)
Fedora Core 5	Yes	Yes	Yes	Yes	Yes	Yes	Yes	VGA Audio	Hardware Accelerator works on VeMP or VeXP player 由於 D-sub 與 S-Video 在硬體設計上同走一條channel, 故在 TV-OUT 部分若接了 S-Video 便需要將 D-sub 給移除, 才不至於影響 S-Video 畫面(D-sub S-Video 兩者只能取其一)
Windows CE 5.0	Yes	Yes	Yes	No	Yes	No	No	VGA Audio	由於 D-sub 與 S-Video 在硬體設計上同走一條channel, 故在 TV-OUT 部分若接了 S-Video 便需要將 D-sub 給移除, 才不至於影響 S-Video 畫面(D-sub S-Video 兩者只能取其一)
Windows CE 4.2	Yes	Yes	Yes	No	Yes	No	No	VGA Audio
Debian 4.0rc3	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Audio
Windows CE 6.0	Yes	Yes	Yes	No	No	No	No	VGA & Audio & IDE
Ubuntu 9.04	Yes	Yes	Yes	Yes	Yes	No	No	TV-OUT

edit table

FAQ for MV700A

CX700 with 32"/42" AD board problem in resolution 1360x768 / 1920x1080 under Linux.

Ans:	1360x768 on 32" LCD Fedora Core 5 = Supported by VGA driver. Need to edit /etc/X11/xorg.conf file, Under Section "Device" add line: Option "PanelID" "10" Option "NoDDCValue" Fedora Core 7 = Supported by kernel. Ubuntu 7.10 = Supported by kernel. 1920x1080 on 42" LCD Fedora Core 5 = Supported by VGA driver. Need to edit /etc/X11/xorg.conf file, Under Section "Device" add line: Option "NoDDCValue" Fedora Core 7 = Supported by kernel. Ubuntu 7.10 = Supported by kernel.
Patch File:	N/A
Defect:	N/A
Asker:	Leon 11/30/07
Provider:	Eric 03/19/08

Any limit on Panel size?

Ans:	8", 10", 12", 15"
Patch File:	N/A
Defect:	N/A
Asker:	Larisa, March 27, 2008
Provider:	Denny, March 27, 2008

Setting BIOS on “CRT+LCD”, then?

Ans:	In X window, display mode will be controled by "driver", doesn't matter what you setting in bios there are two runlevels in linux 1. Graphic mode ( X window ): controled by driver 2. console mode ( text mode ): controled by bios setting
Patch File:	N/A
Defect:	N/A
Asker:	Larisa, March 27, 2008
Provider:	Denny, March 27, 2008

what's the Different methods when using s3utility for Win & Linux?

Ans:	all we talking about situation is "After driver installed". In Windows, execute the S3Utility.exe to modfify what you want to do. In Linux, use command "s3utility" in terminal of X window, then you and adjust display mode you need (needed to be relogin X window to display)
Patch File:	N/A
Defect:	N/A
Asker:	Larisa, March 27, 2008
Provider:	Denny, March 27, 2008

How can I make sure the driver was installed ?

Ans:	1. execute the utility " s3utility " (Screenshot.jpg), you can see supported device (In s3utility, check the "samm mode" button to set mode to dual-head view otherwise uncheck this to clone) 2. driver already be installed if you can execute the s3utility Or execute command "lsmod"(list the modules) to find via driver out
Patch File:	N/A
Defect:	N/A
Asker:	Larisa, March 27, 2008
Provider:	Denny, March 27, 2008

Can choose Clone or Dual-head view?

Ans:	you can choose any one of them in s3utility
Patch File:	include in VGA driver
Defect:	N/A
Asker:	Larisa, March 27, 2008
Provider:	Denny, March 27, 2008

How to use the Dual LVDS with 800x480(7" panel) for Ubuntu?

Ans:	Pls use the CX700XOrg40079_2LCD_800x480_Ubuntu7.10_LEX.tgz (For Ubuntu 7.10). You can download the driver and Clone/Extend configuration file form below patch
Patch File:	For Ubuntu Download_driver Clone_mode_config Extend_mode_config
Defect:	Fedora solution will release in 5/20
Asker:	Max 2008/4/18
Provider:	Leon 2008/5/5

How to use the Dual LVDS with 800x480(7" panel) for Fedora core 8?.

Ans:	Unzip CX700XOrg40079_2LCD_800x480_FC8_LEX.tgz by using commmand: tar zxvf CX700XOrg40079_2LCD_800x480_FC8_LEX.tgz install VGA driver by using commmand: cd CX700XOrg40079_2LCD_800x480_FC8_LEX ./vinstall Install s3utility by using commmand: cd Utility ./utility_install Using s3utility to change display mode by typing commmand: s3utility
Patch File:	VGA Driver
Defect:	Please close the SElinux before using s3utility AP.
Asker:	Max 2008/4/18
Provider:	Eric Wu 18:27, 22 May 2008 (CST)

How to know my CPU bogomips?

Ans:	You can follow the command to got cpu bogomips $ cat /proc/cupinfo So you can see the information as below picture:
Patch File:	N/A
Defect:	N/A
Asker:	Robert 2008/7/16
Provider:	Leon 2008/7/16

How can I play the Video file in Debian4.0rc3 Console mode?

Ans:	Just open your frame buffer device to support video out! Pls follow the procedure to open your frame buffer device when boot 1.Modify your grub setting step1: #vi /boot/grub/menu.lst step2. found the last section in ## ## End Default Options ## step3. Add the red word in end of line kernel /boot/vmlinuz-2.6.18-6-486 root=/dev/hdc1 ro vga=792 how to selection your FB device resolution Colors　640x480　800x600　1024x768　1280x1024　1600x1200　bit 　256　　769　　　　771　　　　773　　　　775　　　　796　　　(8-bit) 32768　　784　　　　787　　　　790　　　　793　　　　797　　　(15-bit) 65536　　785　　　　788　　　　791　　　　794　　　　798　　　(16-bit) 16.8M　　786　　　　789　　　　792　　　　795　　　　799　　　(32-bit) for example : you need the 1280x1024 32bit vga=795 step4.Reboot your computer
Patch File:	N/A
Defect:	N/A
Asker:	EUR Steven 2008/7/15
Provider:	Leon 2008/7/23

How can I use the HD-Audio devices under Debian4.0rc3 console mode?

Ans:	You have to update your ALSA driver for HD-Audio, So download the last version form ALSA website or use our provide driver Pls follow the procedure to update your driver by automatic install step 1.Install the linux-headers package for driver compile $aptiude install linux-headers-2.6.18-6-486 step 2.Decompress the Driver and install it Decompress the driver package: via-linux-audiopackV1.9Beta1.tar.gz and go to the decompressed directory, via-linux-audiopackV1.9Beta1 Automatic install:Run the command $./install step 3.You will see the error message like: WARNING: Error inserting snd_hwdep (/lib/modules/2.6.18-6-486/kernel/sound/acore/snd-hwdep.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd_hda_intel (/lib/modules/2.6.18-6-486/kernel/sound/pci/hda/snd-hda-intel.ko): Unknown symbol in module, or unknown parameteresg) Don't warning and just reboot your computer then tried tried the installer again and ended without the errors step 4.Mount /dev/mixer: Mount the /dev/mixer by command : $ modprobe snd-mixer-oss step 5.Adjust your audio volume by mixer device: Now you have the HD-Audio supported ,but default volume was very small, Pls use the aumix to adjust !! $ apt-get install aumix $ aumix
Patch File:	Audio Driver for Debian4.0rc3 ALSA project website
Defect:	First time install will see error message WARNING: Error inserting snd_hwdep (/lib/modules/2.6.18-6-486/kernel/sound/acore/snd-hwdep.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd_hda_intel (/lib/modules/2.6.18-6-486/kernel/sound/pci/hda/snd-hda-intel.ko): Unknown symbol in module, or unknown parameteresg)
Asker:	EUR Steven 2008/8/04
Provider:	Leon 2008/8/06

Enable HD Audio chip(VT1708A) in WinCE 6.0 by setting platform.reg file.

Ans:	Edit platform.reg (black: original, blue: newly added, red: delete) . . . [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI] "NoConfig"=dword:0 "NoConfig"=dword:1 "MemBase"=dword:80000000 "MemLen" =dword:7b000000 "IoBase"=dword:A000 "IoLen" =dword:6000 . . .
Patch File:	N/A
Defect:	N/A
Asker:	Denny, July 17, 2008
Provider:	Denny, July 17, 2008

How to use Ubuntu 9.04 with MV700A to display the image via the TV-out

Ans:	1.Change the BIOS setting to TV and S-video0 GO into BIOS : Advanced Chipset Features ->AGP & P2P Bridge Control ->Select Display Device --- choose TV ->TV_connecor --- choose S-video0 2.Install the driver $ tar zxvf 5.74.33.86a-u904-50937_tv.tgz $ cd 5.74.33.86a-u904-50937 $ ./vinstall $ reboot
Patch File:	5.74.33.86a-u904-50937_tv.tgz
Defect:	N/A
Asker:	Steven , Dec 10 , 2009
Provider:	Patty , Dec 16 , 2009

Retrieved from "http://tprd.info/lexwiki/index.php/MB:MV700A"

Categories: MB | AllowPages

AllowPages > AllowPages
Object > MB

@@ Line 127: / Line 127: @@
 |
 *[ftp://ftp.lex.com.tw//Engineer/SoftSupport/Driver/SBC_Board/MV700/Linux/Audio/Debian4.0rc3/via-linux-audiopackV1.9Beta1.tar.gz Audio]
+|
+|-
+|
+Windows CE 6.0
+|
+Yes
+|
+Yes
+|
+Yes
+|
+No
+|
+No
+|
+No
+|
+No
+|
+*[ftp://ftp.lex.com.tw/Engineer/SoftSupport/Driver/SBC_Board/MV700/WinCE/6.0/viabsp_v3.43_for_ce60.zip VGA & Audio & IDE]
+|
+|-
+|
+Ubuntu 9.04
+|
+Yes
+|
+Yes
+|
+Yes
+|
+Yes
+|
+Yes
+|
+No
+|
+No
+|
+*[ftp://ftp.lex.com.tw/Engineer/SoftSupport/Driver/SBC_Board/MV700/Linux/Video/5.74.33.86a-u904-50937_tv.tgz TV-OUT]
 |
@@ Line 461: / Line 503: @@
 WARNING: Error inserting snd_hwdep (/lib/modules/2.6.18-6-486/kernel/sound/acore/snd-hwdep.ko): Unknown symbol in module, or unknown parameter (see dmesg)<br />
 FATAL: Error inserting snd_hda_intel (/lib/modules/2.6.18-6-486/kernel/sound/pci/hda/snd-hda-intel.ko): Unknown symbol in module, or unknown parameteresg)<br />
-<font Size="3"><font color=#FF0000>Don't warning and just reboot your computer then tried  tried the installer again and ended without the errors</font><br /><br />
+<font Size="3" color=#FF0000>Don't warning and just reboot your computer then tried  tried the installer again and ended without the errors</font><br /><br />
 *<font Size="3">step 4.Mount /dev/mixer:</font><br /><br />
 Mount the /dev/mixer by command :<br />
@@ Line 475: / Line 517: @@
 !bgcolor = #F3F3F3 align="left"|
 *[ftp://ftp.lex.com.tw//Engineer/SoftSupport/Driver/SBC_Board/MV700/Linux/Audio/Debian4.0rc3/via-linux-audiopackV1.9Beta1.tar.gz Audio Driver for Debian4.0rc3]
+*[http://www.alsa-project.org/main/index.php/Main_Page ALSA project website]
 |-
 !bgcolor = #ccccff |Defect:
 !bgcolor = #F3F3F3 align="left"|
-"write Defect"
+First time install will see error message<br />
+WARNING: Error inserting snd_hwdep (/lib/modules/2.6.18-6-486/kernel/sound/acore/snd-hwdep.ko): Unknown symbol in module, or unknown parameter (see dmesg)<br />
+FATAL: Error inserting snd_hda_intel (/lib/modules/2.6.18-6-486/kernel/sound/pci/hda/snd-hda-intel.ko): Unknown symbol in module, or unknown parameteresg)<br />
+|-
+!bgcolor = #ccccff |Asker:
+!bgColor = #F3F3F3 align="left"|
+EUR Steven 2008/8/04
+|-
+!bgcolor = #ccccff |Provider:
+!bgColor = #F3F3F3 align="left"|
+Leon 2008/8/06
+|-
+|}
+=== Enable HD Audio chip(VT1708A) in WinCE 6.0 by setting platform.reg file. ===
+{|
+!bgcolor = #ccccff width="50" align="center"|Ans:
+!bgcolor = #F3F3F3 width="100%" align="left"|
+*Edit platform.reg (black: original, blue: newly added, red: delete)
+ .
+ .
+ .
+ [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI]
+ <font color=#FF0000>"NoConfig"=dword:0</font>
+ <font color=#0000FF>"NoConfig"=dword:1</font>
+ "MemBase"=dword:80000000
+ "MemLen" =dword:7b000000
+ "IoBase"=dword:A000
+ "IoLen" =dword:6000
+ .
+ .
+ .
+|-
+!bgcolor = #ccccff |Patch File:
+!bgcolor = #F3F3F3 align="left"|
+N/A
+|-
+!bgcolor = #ccccff |Defect:
+!bgcolor = #F3F3F3 align="left"|
+N/A
+|-
+!bgcolor = #ccccff |Asker:
+!bgColor = #F3F3F3 align="left"|
+Denny, July 17, 2008
+|-
+!bgcolor = #ccccff |Provider:
+!bgColor = #F3F3F3 align="left"|
+Denny, July 17, 2008
+|-
+|}
+=== How to use Ubuntu 9.04 with MV700A to display the image via the TV-out ===
+{|
+!bgcolor = #ccccff width="50" align="center"|Ans:
+!bgcolor = #F3F3F3 width="100%" align="left"|
+.Change the BIOS setting to TV and S-video0
+ GO into BIOS : Advanced Chipset Features
+              ->AGP & P2P Bridge Control
+              ->Select Display Device --- choose TV
+              ->TV_connecor --- choose S-video0
+.Install the driver
+ $ tar zxvf 5.74.33.86a-u904-50937_tv.tgz
+ $ cd 5.74.33.86a-u904-50937
+ $ ./vinstall
+ $ reboot
+|-
+!bgcolor = #ccccff |Patch File:
+!bgcolor = #F3F3F3 align="left"|
+[ftp://ftp.lex.com.tw/Engineer/SoftSupport/Driver/SBC_Board/MV700/Linux/Video/5.74.33.86a-u904-50937_tv.tgz 5.74.33.86a-u904-50937_tv.tgz]
+|-
+!bgcolor = #ccccff |Defect:
+!bgcolor = #F3F3F3 align="left"|
+N/A
 |-
 !bgcolor = #ccccff |Asker:
 !bgColor = #F3F3F3 align="left"|
-"writ Asker & date"
+Steven , Dec 10 , 2009
 |-
 !bgcolor = #ccccff |Provider:
 !bgColor = #F3F3F3 align="left"|
-"writ Provider & date"
+Patty , Dec 16 , 2009
 |-
 |}

MB:MV700A

From LEXWiKi

Current revision

Contents

Driver

FAQ for MV700A

CX700 with 32"/42" AD board problem in resolution 1360x768 / 1920x1080 under Linux.

Any limit on Panel size?

Setting BIOS on “CRT+LCD”, then?

what's the Different methods when using s3utility for Win & Linux?

How can I make sure the driver was installed ?

Can choose Clone or Dual-head view?

How to use the Dual LVDS with 800x480(7" panel) for Ubuntu?

How to use the Dual LVDS with 800x480(7" panel) for Fedora core 8?.

How to know my CPU bogomips?

How can I play the Video file in Debian4.0rc3 Console mode?

How can I use the HD-Audio devices under Debian4.0rc3 console mode?

Enable HD Audio chip(VT1708A) in WinCE 6.0 by setting platform.reg file.

How to use Ubuntu 9.04 with MV700A to display the image via the TV-out

Views

Personal tools

Navigation

分類(Object)

Search

Toolbox