請先看『使用說明』

From LEXWiKi

Current revision

LAN By Pass Utility Download

<FTP>

Source file: LanByPass_v1.01w_Src_x86LanByPass_v1.01w_Src_x64

Binary file: LanByPass_v1.01w_Bin_x86LanByPass_v1.01w_Bin_x64

How to Use The Utility

1. Loop Time

Loop time is means "the time of delay before LAN by pass be enabled".

2. Enable

Enable LAN by pass function.

3. Disable

Disable LAN by pass function.

4. Loop Test

Do LAN by pass loop test as below picture.

Introdution

Generic F75111 Definition

//For F75111 Controller
#define WDT_I2CADD 0x9C
#define WDTimer    0x37
#define WDT_Ctrl   0x36
#define config     0x03

//For WDT control register
#define STS_WD_TMOUT_Clear 0x40
#define WDTimer_Enable 0x20

Enable Function

void EnableLanByPass()
{	
	WriteI2CByte(WDT_I2CADD, config, 0x03);
	WriteI2CByte(WDT_I2CADD, WDTimer, gLoopTime);
	WriteI2CByte(WDT_I2CADD, WDT_Ctrl, STS_WD_TMOUT_Clear | WDTimer_Enable);
}

Disable Function

• The LAN by pass disable function is also "initialize function".

void InitialWDTimeoutStatus()  //It is also Disable Function
{
	WriteI2CByte(WDT_I2CADD, config, 0x03);
	WriteI2CByte(WDT_I2CADD, WDT_Ctrl, STS_WD_TMOUT_Clear);
}

Loop Test Function

int RunLoopTestThread()
{
	for(int i=gLoopTime;i>=2;i--)
	{
		if((i==2) && (gThreadContinue))
		{
			WriteI2CByte(WDT_I2CADD, WDTimer, gLoopTime);
			
			i=gLoopTime;
		}
		Sleep(1000);
	}
	return 0;
}