請先看『使用說明』
IO Device:F75113 C Sharp under Windows
From LEXWiKi
(→The Sample code source you can download from) |
|||
| Line 2: | Line 2: | ||
== The Sample code source you can download from == | == The Sample code source you can download from == | ||
| + | Source file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/F75113/Windows_CS/75113_CS_src_v1.2.zip 75113_CS_src_v1.2.zip] | ||
X64 Binary file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/F75113/Windows_CS/75113_CS_bin_v1.2_x64.zip 75113_CS_bin_v1.2_x64.zip] | X64 Binary file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/F75113/Windows_CS/75113_CS_bin_v1.2_x64.zip 75113_CS_bin_v1.2_x64.zip] | ||
Revision as of 17:47, 15 April 2021
Contents |
The Sample code source you can download from
Source file: 75113_CS_src_v1.2.zip
X64 Binary file: 75113_CS_bin_v1.2_x64.zip
X32 Binary file: 75113_CS_bin_v1.2_x86.zip
F75113 DLL : F75113.dll
How to use this Demo Application
1. Run DIO_WDT.exe as administrator
2. Connected the DI and DO pin
3. Before you press the "Write" button, Check the box what you like to send high data first
4. Press the "Read" button to get data from DO
5. Press the "Enable" button to test WDT function
6. Press the "Disable" button when WDT enable to disable WDT
F75113 Layout Picture
Introduction
Base on 75113.Dll API as below list
F75113_DLL_API bool F75113_Init();
F75113_DLL_API BYTE F75113_GetDigital_Low_Input();
F75113_DLL_API void F75113_SetDigital_Low_Output(BYTE byteValue);
F75113_DLL_API BYTE F75113_GetDigital_High_Input();
F75113_DLL_API void F75113_SetDigital_High_Output(BYTE byteValue);
F75113_DLL_API void F75113_SetWDT_Enable(BYTE byteTimer);
F75113_DLL_API void F75113_SetWDT_Disable();
