請先看『使用說明』
Module:M954B/M954C module under Linux
From LEXWiKi
(→3.Compiler edit code) |
(→3.Build driver to kernel) |
||
| Line 157: | Line 157: | ||
| - | Ends of your compiler , driver to the kernel | + | Ends of your compiler , build driver to the kernel |
#sudo insmod ax99100.ko | #sudo insmod ax99100.ko | ||
| Line 163: | Line 163: | ||
[[Image:AX99100 insmod.JPG]] | [[Image:AX99100 insmod.JPG]] | ||
| + | |||
| + | #sudo make install | ||
| + | |||
| + | [[Image:Image:AX99100 makeinstall.JPG]] | ||
Revision as of 15:40, 6 February 2023
| OS | Kernrl | Module | baudrate | TEST Mode | Driver | Download |
|---|---|---|---|---|---|---|
|
Ubuntu 18.04.3 |
4.18.0-25-generic |
M954C |
9600/38400/115200 |
RS485 |
AX99100 v1.6 | |
|
Ubuntu20.04.3 Lts |
5.13.0-28-generic |
M954C |
9600/38400/115200 |
RS485 |
AX99100 v1.8 | |
|
Debian 8.11.1 amd64 |
3.16.0.6-amd64 |
M954B |
9600/38400/115200 |
RS485 |
AX99100 v1.6 | |
|
Debian 9.4 |
4.9.0.14-amd64 |
M954B |
9600/38400/115200 |
RS485 |
AX99100 v1.6 | |
|
OpenSUSE Tumbleweed 15.2 |
5.10.9-1-default |
M954B |
9600/38400/115200 |
RS485 |
AX99100 v1.6 | |
|
Debian 9.13 |
4.9.0-16-amd64 |
M954B |
9600/38400/115200 |
RS485 |
AX99100 v1.6 | |
|
Debain 10.10 |
4.19.0-17-amd64 |
M954B |
9600/38400/115200 |
RS485 |
AX99100 v1.6 |
Contents |
How to use M954B/M954C driver
1.First jump mode
you need to know which mode do you want and check device jump to the correct mode
2.Second confirm and edit transmittal mode
After your confirm your transmittal mode
Edit ax99100_sp.c code to your requirement(default is RS232)
For example if you want to test RS485 half duplex so you need to change the code uart mode
//Port1/Port2/Port3/Port4 .uart_mode= AX99100_RS485_HALF_DUPLEX,
You have 4 ports ,so you need to change code port1-port4 uart mode
3.Build driver to kernel
After edit ax99100_sp.c you can start to build AX99100 driver
#sudo make
Ends of your compiler , build driver to the kernel
#sudo insmod ax99100.ko #sudo rmmod ax99100
#sudo make install
