請先看『使用說明』
MB Auto Tool
From LEXWiKi
| Line 56: | Line 56: | ||
| - | === | + | === Switch ether card duplex mode === |
| - | [[Image: | + | [[Image:Mb_0004-1.png]]<br /> |
| - | ''' | + | '''You could modify selected ether card duplex mode manually. Button is disable if net chip not support.'''<br /> |
| - | * | + | *3-1. Press button to switch selected ether card duplex mode.<br /> |
| - | * | + | |
| - | * | + | |
| - | * | + | === Testing ether card and WDT === |
| + | [[Image:Mb_0005-1.png]]<br /> | ||
| + | |||
| + | '''You could test selected ether card expected speed value and reality speed value. And it detect WDT type.'''<br /> | ||
| + | *5-1. Select whitch duplex mode ready to test.<br /> | ||
| + | *5-2. Enter network connecting test server address. Tick the checkbox is connecting to LEX server(192.168.1.2).<br /> | ||
| + | [[Image:Mb_0005-2.png]]<br /> | ||
| + | *Untick the checkbox is connecting to google NTP server(time.google.com).<br /> | ||
| + | [[Image:Mb_0005-3.png]]<br /> | ||
| + | *5-3. Tick the checkbox. It could skip checking IP address that is legal from LEX IP.<br /> | ||
| + | *5-4. Tick the checkbox. It could get WDT type on the motherboard.<br /> | ||
| + | *5-5. Press button to switch next page or preve page about ether card testing result.<br /> | ||
| + | *5-6. Press button to start testing selected ether card, WDT, and set system time from NTP.<br /> | ||
Revision as of 16:01, 9 March 2023
Contents |
Introduction
MB Auto tool is a tool for testing the functions of LEX motherboard.
The binary file you can download from
(*)Windows7 must updated KB2999226
<Google Drive>
Binary file(64 bit): MB Auto Tool_v1.3.5.77_x64
Simple Manuual Guide(Chinese): Simple Manuual Guide
<FTP>
Binary file(32 bit): MB Auto Tool_v1.3.5.77_x64
Simple Manuual Guide(Chinese): Simple Manuual Guide
How to use MB Auto tool
When start utility, it will auto scan and show base hardware information on the motherboard.
Support scan barcode reading motherboard information
You could get motherboard model、count of LAN port、count of COM port and CIO information depends on scanning barcode.
- 1-1. Scan barcode on the motherboard.
BIOS and base hardware information
When start utility, it will auto scan BIOS and CPU information on the motherboard.
If mini card is inserted, it will auto scan and show PCIE or USB device.
- 2-1. BIOS and base hardware information.
- 2-2. Press button to call hardware manager from windows.
Modify batch IP address
Help you to modify batch IP address automatically.
- 3-1. Press button to pop up IP setting menu.
- 3-2. Type static IP address range.
- 3-3. Set static IP or dynamic IP to all ether card.
- 3-4. Ether card information window. If network cable is inserted, show reality IP address.
- 3-5. Ether card information window. If network cable is not inserted, show blank.
Switch ether card duplex mode
You could modify selected ether card duplex mode manually. Button is disable if net chip not support.
- 3-1. Press button to switch selected ether card duplex mode.
Testing ether card and WDT
You could test selected ether card expected speed value and reality speed value. And it detect WDT type.
- 5-1. Select whitch duplex mode ready to test.
- 5-2. Enter network connecting test server address. Tick the checkbox is connecting to LEX server(192.168.1.2).
- Untick the checkbox is connecting to google NTP server(time.google.com).
- 5-3. Tick the checkbox. It could skip checking IP address that is legal from LEX IP.
- 5-4. Tick the checkbox. It could get WDT type on the motherboard.
- 5-5. Press button to switch next page or preve page about ether card testing result.
- 5-6. Press button to start testing selected ether card, WDT, and set system time from NTP.
