MB Auto Tool

From LEXWiKi

(Difference between revisions)
Jump to: navigation, search
(→The binary file you can download from)
(→The binary file you can download from)
Line 7: Line 7:
(*)Windows7 must updated [https://www.microsoft.com/en-US/download/details.aspx?id=49093 KB2999226]
(*)Windows7 must updated [https://www.microsoft.com/en-US/download/details.aspx?id=49093 KB2999226]
 +
(*)Windows must updated Redistributable latest supported [https://aka.ms/vs/17/release/vc_redist.x64.exe For X64]

Revision as of 11:46, 12 June 2023


Contents

Introduction

MB Auto tool is a tool for testing the functions of LEX motherboard.

The binary file you can download from

(*)Windows7 must updated KB2999226 (*)Windows must updated Redistributable latest supported For X64


<Google Drive>

Binary file(64 bit): MB Auto Tool_v1.5.6.13_x64

Simple Manuual Guide(Chinese): Simple Manuual Guide


<FTP>

Binary file(64 bit): MB Auto Tool_v1.5.6.13_x64

Simple Manuual Guide(Chinese): Simple Manuual Guide

How to use MB Auto tool

Image:Mb_0001.png

When start utility, it will auto scan and show base hardware information on the motherboard.


Support scan barcode reading motherboard information

Image:Mb_0001-1.png

You could get motherboard model、count of LAN port、count of COM port and CIO information depends on scanning barcode.

  • 1-1. Scan barcode on the motherboard.


BIOS and base hardware information

Image:Mb_0002-1.png

When start utility, it will auto scan BIOS and CPU information on the motherboard.
If mini card is inserted, it will auto scan and show PCIE or USB device.

  • 2-1. BIOS and base hardware information.
  • 2-2. Press button to call hardware manager from windows.


Modify batch IP address

Image:Mb_0003-1.pngImage:Mb_0003-2.png

Help you to modify batch IP address automatically.

  • 3-1. Press button to pop up IP setting menu.
  • 3-2. Type static IP address range.
  • 3-3. Set static IP or dynamic IP to all ether card.
  • 3-4. Ether card information window. If network cable is inserted, show reality IP address.
  • 3-5. Ether card information window. If network cable is not inserted, show blank.


Switch ether card duplex mode

Image:Mb_0004-1.png

You could modify selected ether card duplex mode manually. Button is disable if net chip not support.

  • 3-1. Press button to switch selected ether card duplex mode.


Testing ether card and WDT

Image:Mb_0005-1.png

You could test selected ether card expected speed value and reality speed value. And it detect WDT type.

  • 5-1. Select whitch duplex mode ready to test.
  • 5-2. Enter network connecting test server address. Tick the checkbox is connecting to LEX server(192.168.1.2).

Image:Mb_0005-2.png

  • Untick the checkbox is connecting to google NTP server(time.google.com).

Image:Mb_0005-3.png

  • 5-3. Tick the checkbox. It could skip checking IP address that is legal from LEX IP.
  • 5-4. Tick the checkbox. It could get WDT type on the motherboard.(Current support: F75111、F81966)
  • 5-5. Press button to switch next page or preve page about ether card testing result.
  • 5-6. Press button to start testing selected ether card, WDT, and set system time from NTP.
Retrieved from "http://tprd.info/lexwiki/index.php/MB_Auto_Tool"
Personal tools