請先看『使用說明』

From LEXWiKi

Revision as of 15:36, 27 June 2024

The Sample code source you can download from

<Google Drive>

Source file: CIO_Utility_Console_v1.7.0_Src

Binary file: CIO_Utility_Console_v1.7.0_Bin

<FTP>

Source file: CIO_Utility_Console_v1.7.0_Src

Binary file: CIO_Utility_Console_v1.7.0_Bin

MB Support List

edit table

How to use this Demo Application

Step1. Unzip "CIO_Utility_Console_L_Bin_v1.7.0.zip" and change user permission

The program must control I/O device. You must change user permission to "root". You could use this command "sudo su"

Step2. Execute program

Enter "./CIO_Utility_console -h" to show help menu.

Example:
CIO_Utility_console -w 1 -s h
CIO_Utility_console -r 1
CIO_Utility_console -W -s 0x0f
CIO_Utility_console -R

Step3. Use'-o' to simple control F75111 DO pin

Enter "./CIO_Utility_console -o <CIO_SN> -s <Pin_SN>" to send DO signal.

Example:
"./CIO_Utility_console -o 1 -s 1" means use CIO1 module DO-0 pin (0x01) send signal.
"./CIO_Utility_console -o 1 -s 3" means use CIO1 module DO-0 and DO-1 pin (0x01 + 0x02) send signal.
"./CIO_Utility_console -o 1 -s f" means use CIO1 module DO-0, DO-1, DO-2 and DO-3 pin (0x01 + 0x02 + 0x04 + 0x08) send signal.

F75111 Layout Picture

Introduction

Initial Internal F75111 port address (0x9c)

   define GPIO1X, GPIO2X, GPIO3X to input or output 
   and Enable WDT function pin 

Base on libF75111.a API function as below list

bool	F75111_Init();
bool	F75111_4I4O_Init();
bool	F75111_8I8O_Init(); 

bool	F75111_GetDigitalInput_Pin(int);	//pin number 0-15
BYTE	F75111_GetDigitalInput();
BYTE	F75111_GetDigitalInput_4I4O();          //4I4O(CIO1)
BYTE	F75111_GetDigitalInput_8I8O();          //8I(CIO1)+8O(CIO2)

bool	F75111_SetDigitalOutput_Pin(BYTE pin_number,bool pin_status);
void	F75111_SetDigitalOutput(BYTE byteValue);
void    F75111_SetDigitalOutput_4I4O(BYTE byteValue);//20190828 add by Nico ,20200430 kk update
void	F75111_SetDigitalOutput_8I8O(BYTE byteValue);
void	F75111_SetDigitalOutput_1i1o(BYTE byteValue);//20200504 jimmy update for wet3901

BYTE	F75111_GetWDTMode();
void	F75111_SetWDTMode(BYTE dwvalue); 

void	F75111_SetWDTEnable    (BYTE byteTimer);
void	F75111_SetWDTDisable   ();