MB:CV766C

From LEXWiKi

(Difference between revisions)
Jump to: navigation, search
(→Enable RS232 (COM1~COM4) support in WinCE 6.0 by setting platform.reg file.)
Line 304: Line 304:
!bgColor = #F3F3F3 align="left"|
!bgColor = #F3F3F3 align="left"|
[[User:Wueric|Eric Wu]] 11:04, 26 August 2008 (CST)
[[User:Wueric|Eric Wu]] 11:04, 26 August 2008 (CST)
 +
|-
 +
|}
 +
 +
=== How can I use Serial port COM5 and COM6 in Linux? ===
 +
{|
 +
!bgcolor = #ccccff width="50" align="center"|Ans:
 +
!bgcolor = #F3F3F3 width="100%" align="left"|
 +
1.
 +
#make menuconfig
 +
 +
2.choose module
 +
[ Device Drivers ]
 +
[Character Devices ]
 +
[Serial drivers] -> (4)Number of 8250/16550 serial port to register at runtime
 +
 +
The item is for serial port number , default is 4.
 +
Please set the number you need.
 +
 +
You should set 6 for touch panel, then compile the kernel.
 +
 +
|-
 +
!bgcolor = #ccccff |Patch File:
 +
!bgcolor = #F3F3F3 align="left"|
 +
N/A
 +
|-
 +
!bgcolor = #ccccff |Defect:
 +
!bgcolor = #F3F3F3 align="left"|
 +
N/A
 +
|-
 +
!bgcolor = #ccccff |Asker:
 +
!bgColor = #F3F3F3 align="left"|
 +
[[User:PattyChen|Patty]] 09:11, 18 February 2009 (CST)
 +
|-
 +
!bgcolor = #ccccff |Provider:
 +
!bgColor = #F3F3F3 align="left"|
 +
[[User:PattyChen|Patty]] 09:11, 18 February 2009 (CST)
|-
|-
|}
|}

Revision as of 09:11, 18 February 2009

Contents

Driver Support

O.S. VGA Audio IDE Video-in TV-OUT LAN Download Patch

Windows XP Embedded

Yes

Yes

Yes

-

No

Yes

Windows CE 5.0

Yes

Yes

Yes

-

No

Yes

Ubuntu 7.10

Yes

Yes

Yes

-

No

Yes

  • Supported by kernel

Debian 4.0

Yes

Yes

Yes

-

No

Yes

  • Supported by kernel

Suse10.3

Yes

Yes

Yes

-

No

Yes

  • Sound support by kernel built-in driver (via 8237 alsa mixer)
  • Lan support by kernel built-in driver (8139too)

Fedora Core 7

Yes

Yes

Yes

-

No

Yes

Fedora Core8

Yes

Yes

Yes

-

No

Yes

Windows CE 6.0

Yes

Yes

Yes

-

No

Yes

edit table

FAQ of CV766C

Enable RS232 (COM1~COM4) support in WinCE 6.0 by setting platform.reg file.

Ans:
  • Make sure the com ports setting are the same as in BIOS setting.
    • COM1: irq 4, address 0x3F8
    • COM2: irq 3, address 0x2F8
    • COM3: irq 5, address 0x3E8
    • COM4: irq 10, address 0x2E8
  • Edit platform.reg (black: original, blue: newly added, red: delete) 
IF BSP_SERIAL3
       "Ranges"="0-0x5F,0x65-0x277,0x284-0x2E7,0x2F0-0x2F7,0x300-0x38F,0x392-0x3DF,0x3E2-0x3E7,0x3F0-0xFFFF"
       "Ranges"="0-0x5F,0x65-0x277,0x284-0x2E7,0x2F0-0x2F7,0x300-0x38F,0x392-0x3DF,0x3E2-0x3E7,0x3F0-0x3F7,0x400-0xFFFF"
ENDIF BSP_SERIAL3
IF BSP_SERIAL2
       "SerialDbg1"="Drivers\\BuiltIn\\Serial2"
       "SerialDbg4"="Drivers\\BuiltIn\\Serial2"
ENDIF BSP_SERIAL2
.
.
.
IF BSP_SERIAL3
       "SerialDbg3"="Drivers\\BuiltIn\\Serial3"
       "SerialDbg5"="Drivers\\BuiltIn\\Serial3"
ENDIF BSP_SERIAL3
.
.
.
IF BSP_NOSERIAL !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial]
       "SysIntr"=dword:13 
       "SysIntr"=dword:14 
       "IoBase"=dword:02F8 
       "IoBase"=dword:03F8
.
.
.
IF BSP_SERIAL2
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial2]
       "SysIntr"=dword:14 
       "SysIntr"=dword:13 
       "IoBase"=dword:03F8
       "IoBase"=dword:02F8
.
.
.
ENDIF BSP_SERIAL2
IF BSP_SERIAL3
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial3]
       "SysIntr"=dword:15
       "IoBase"=dword:02E8 
       "IoBase"=dword:03E8
.
.
.
ENDIF BSP_SERIAL3
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial4]
       "SysIntr"=dword:1A
       "IoBase"=dword:02E8	
       "IoLen"=dword:8
       "DeviceArrayIndex"=dword:3
       "Prefix"="COM"
       "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}"
       "Dll"="Com16550.Dll"
       "Order"=dword:0
       "Flags"=dword:10 ; User MOde: DEVFLAGS_LOAD_AS_USERPROC
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial4\Unimodem]
       "Tsp"="Unimodem.dll"
       "DeviceType"=dword:0
       "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00
       #if ! (defined IMGPPC || defined IMGTPC)
            "FriendlyName"=LOC_FRIENDLYNAME_SERIAL4
            "FriendlyName"="Serial Cable on COM4:"
       #else (defined IMGPPC || defined IMGTPC)
{BEGIN MULTILANG}
       ; @BEGINASSOC LOCALE %LANGID%
           [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial4\Unimodem]
               "FriendlyName"=LOC_%LANGID%_FRIENDLYNAME_SERIAL4
               ;"FriendlyName"="Serial Cable on COM4:"
       ; @ENDASSOC
{END MULTILANG}
       #endif ! (defined IMGPPC || defined IMGTPC)
ENDIF BSP_NOSERIAL ! 
.
.
.
Patch File:

N/A

Defect:

N/A

Asker:

Eric Wu 09:27, 26 August 2008 (CST)

Provider:

Eric Wu 09:27, 26 August 2008 (CST)

Sloving WinCE 6.0 image booting problem with SATA device.

Ans:
  • Install WinCE 6.0 IDE driver and enable it at "Catalog Items View" in Platform Builder 6.0. 
Location is : Third Party -> Devices Drivers -> VIA PATA/SATA Storage Block Driver
  • Disable original ATAPI driver at "Catalog Items View" in Platform Builder 6.0. 
Location is : Device Drivers -> Storage Devices -> ATAPI PCI Support
Patch File:

N/A

Defect:

N/A

Asker:

Eric Wu 11:04, 26 August 2008 (CST)

Provider:

Eric Wu 11:04, 26 August 2008 (CST)

How can I use Serial port COM5 and COM6 in Linux?

Ans:

1. 

 #make menuconfig

2.choose module 

 [ Device Drivers ]
          [Character Devices ]
                [Serial drivers] -> (4)Number of 8250/16550 serial port to register at runtime

The item is for serial port number , default is 4. Please set the number you need.

You should set 6 for touch panel, then compile the kernel.

Patch File:

N/A

Defect:

N/A

Asker:

Patty 09:11, 18 February 2009 (CST)

Provider:

Patty 09:11, 18 February 2009 (CST)

Retrieved from "http://tprd.info/lexwiki/index.php/MB:CV766C"
Personal tools