LCM Module:LCM under Linux

From LEXWiKi

(Difference between revisions)
Jump to: navigation, search
(→How to use the DEMO application)
(→Open COM Port Device)
Line 29: Line 29:
== Sample code Introduction ==
== Sample code Introduction ==
-
===Open COM Port Device===
+
===Open COM Port Device(COM1~COM4)===
-
In Sample code /LCM.cpp lin 25
+
portinfo_t portinfo1 ={'0' , 9600 , '8', '0' , '0' , '0' , '0' , '0' , '1' , 0 };
-
portinfo_t portinfo ={
+
portinfo_t portinfo2 ={'0' , 9600 , '8', '0' , '0' , '0' , '1' , '0' , '1' , 0 };
-
'0', // print prompt after receiving
+
portinfo_t portinfo3 ={'0' , 9600 , '8', '0' , '0' , '0' , '2' , '0' , '1' , 0 };
-
9600, // baudrate: 9600
+
portinfo_t portinfo4 ={'0' , 9600 , '8', '0' , '0' , '0' , '3' , '0' , '1' , 0 };
-
'8', // databit: 8
+
//Default tty:COM2
-
'0', // debug: off
+
-
'0', // echo: off
+
-
'0', // flow control:none
+
-
'4', // default tty: COM2
+
-
'0', // parity: none
+
-
'1', // stopbit: 1
+
-
0 // reserved
+
-
};
+
-
PortSet(fdcom, &portinfo);
+
-
/*******************init to clear the Screen*******************/
+
-
fdcom = PortOpen(&portinfo); //Open the COM port devices
+
-
PortSend(fdcom, &clrcom, C8); //Clear All screen message
+
===Send the UP line message to LCM Device===
===Send the UP line message to LCM Device===

Revision as of 17:12, 27 April 2009

Contents

LCM Module Spec

LCM Module spec and command list :LCM-Spec

The Sample code source you can download form

Source file: LCM_src_v11.tar.gz

Binary file: LCM_v11.tar.gz

How to Switch functions

Our LCM module can support TTL and RS232 type,Please make sure your serial port support type,
And switch LCM JUMP as below picture!!

Function:
Image:LCM_RS232.JPG

TTL Function:
Image:LCM_TTL.JPG

How to use the DEMO application

Image:lcmctl.JPG

  1. COM Port selection
  2. Confirm COM Port select
  3. Upline message enter
  4. Upline message send
  5. Clear upline
  6. Lowline message enter
  7. Lowline message send
  8. Clear lowline

Sample code Introduction

Open COM Port Device(COM1~COM4)

portinfo_t portinfo1 ={'0' , 9600 , '8',  '0' , '0' , '0' , '0' , '0' ,  '1' , 0 };
portinfo_t portinfo2 ={'0' , 9600 , '8',  '0' , '0' , '0' , '1' , '0' ,  '1' , 0 };
portinfo_t portinfo3 ={'0' , 9600 , '8',  '0' , '0' , '0' , '2' , '0' ,  '1' , 0 };
portinfo_t portinfo4 ={'0' , 9600 , '8',  '0' , '0' , '0' , '3' , '0' ,  '1' , 0 };
//Default tty:COM2

Send the UP line message to LCM Device

In Sample code /LCD_CTLDlg.cpp lin 15 and 58 

   char upline[C32]={0x1b,0x51,0x41}; //for LCM UP line command
   gets(message);
   sprintf(upline+3,"%s\r",message);
   PortSend(fdcom, upline, C32); //Send the message to LCM

Send the LOW line message to LCM Device

In Sample code /LCD_CTLDlg.cpp lin 16 and 66 

   char lowline[C32]={0x1b,0x51,0x42}; //for LCM LOW line command
   gets(message);
   sprintf(lowline+3,"%s\r",message);
   PortSend(fdcom, lowline, C32); //Send the message to LOW Line

LCM Command list

Please check the page6 in spec file ,you can download form LCM-Spec

Retrieved from "http://tprd.info/lexwiki/index.php/LCM_Module:LCM_under_Linux"
Personal tools