MB:CI945C

(Difference between revisions)

Revision as of 07:03, 14 May 2010

O.S.	VGA	IDE	SATA	Audio	USB	COM	LAN	Mini PCI	Mini PCIE	WDT/DIO	Download	Patch
Ubuntu 8.04	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	All supported by kernel
Windows XP	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	VGA IDE & SATA & USB Audio LAN The remaining from the core support
Fedora Core 8	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Audio The remaining from the core support	For six com ports support, the kernel must update to 2.6.25.4-10.fc8
Debian 4.0	Yes	Yes	Yes	No	Yes	Yes	No	No	No		Kernel support default	VGA-cannot get into X-window
Debian 4.0	Yes	Yes	Yes	No	Yes	Yes	Yes	No	No	No	Kernel default support
Windows XP Embedded	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	VGA IDE & SATA & USB Audio LAN The remaining from the core support
CentOS4.3	Yes	Yes	Yes	No	Yes	Yes	Yes	-	-	Yes

Ans:	Celeron M processor ULV: 423 Celeron M processor: 440, 530, 550 Core Duo processor LV: L2400 Core Duo processor: U2500, T2500 Core 2 Duo processor: L7400, T7400 Core 2 Duo processor ULV: U7500
Patch File:	N/A
Defect:	N/A
Asker:	Eric Wu 18:07, 21 April 2008 (CST)
Provider:	Eric Wu 18:07, 21 April 2008 (CST)

Ans:	#vi /boot/grub/menu.lst Add "8250.nr_uarts=6" in the kernel line as below picture: (In Fedora) (In Ubuntu) #reboot And then you can use 6 COM ports.
Patch File:	N/A
Defect:	N/A
Asker:	Patty 17:12, 6 March 2009 (CST)
Provider:	Patty 17:12, 6 March 2009 (CST)

Ans:	yes, in Fedora 10 & ubuntu 8.10, using vesa driver to set dual head check xorg.conf for detail.
Patch File:	xorg.conf
Defect:	N/A
Asker:	Denny 2009/04/06
Provider:	Denny 2009/04/06

Ans:	No,The Kerenl 2.4.x like Redhat9 Kerenl 2.4.20.8 It's too old to support 8111C, So We strong recommand to Install 8111C driver module by manual You can got 8111C driver in below Patch File!
Patch File:	RT8111C Driver
Defect:	N/A
Asker:	Scott 2009/10/16
Provider:	Leon 2009/10/16

Ans:	1.install RTL8111c driver 2.Add or modify your "ifcfg-ethx" ethernet port config file example:using DHCP on Eth1 port. DEVICE=eth1 BOOTPROTO=dhcp HWADDR=XX:XX:XX:XX:XX:XX #MAC address 3.check your network states in runlevel 3 and 5 #chkconfig --list \| grep network if network states are closed in runlevel 3 or 5 #chkconfig --level (5or3) network on
Patch File:	"write Patch File"
Defect:	"N/A"
Asker:	"Steve 2010/05/13"
Provider:	"Steve 2010/05/13"

@@ Line 343: / Line 343: @@
 !bgcolor = #ccccff width="50" align="center"|Ans:
 !bgcolor = #F3F3F3 width="100%" align="left"|
-"
 .install RTL8111c driver<br />
-.Add or modify your "ifcfg-eth0" ethernet port config file:<br />
+.Add or modify your "ifcfg-ethx" ethernet port config file<br />
- If you "
+example:using DHCP on Eth1 port.   <br />
+    DEVICE=eth1
+    BOOTPROTO=dhcp
+    HWADDR=XX:XX:XX:XX:XX:XX  #MAC address
+.check your network states in runlevel 3 and 5
+    #chkconfig --list | grep network
+    if network states are closed in runlevel 3 or 5
+    #chkconfig --level (5or3) network on
 |-
 !bgcolor = #ccccff |Patch File:
@@ Line 354: / Line 361: @@
 !bgcolor = #ccccff |Defect:
 !bgcolor = #F3F3F3 align="left"|
-"write Defect"
+"N/A"
 |-
 !bgcolor = #ccccff |Asker:
 !bgColor = #F3F3F3 align="left"|
-"writ Asker & date"
+"Steve 2010/05/13"
 |-
 !bgcolor = #ccccff |Provider:
 !bgColor = #F3F3F3 align="left"|
-"writ Provider & date"
+"Steve 2010/05/13"
 |-
 |}