請先看『使用說明』
IO Device:F81801 DIO under Windows
From LEXWiKi
(Difference between revisions)
(→How to use this Demo Application) |
(→The Sample code source you can download from) |
||
| Line 1: | Line 1: | ||
== The Sample code source you can download from == | == The Sample code source you can download from == | ||
| - | = | ||
Source file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/F81801_DIO/windows_base/F81801_DIO_v0.2_Src_W.zip F81801_DIO_v0.2_Src_W.zip] | Source file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/F81801_DIO/windows_base/F81801_DIO_v0.2_Src_W.zip F81801_DIO_v0.2_Src_W.zip] | ||
| Line 6: | Line 5: | ||
Binary file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/F81801_DIO/windows_base/F81801_DIO_v0.2_x86_Bin_W.zip F81801_DIO_v0.2_x86_Bin_W.zip] | Binary file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/F81801_DIO/windows_base/F81801_DIO_v0.2_x86_Bin_W.zip F81801_DIO_v0.2_x86_Bin_W.zip] | ||
[ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/F81801_DIO/windows_base/F81801_DIO_v0.2_x64_Bin_W.zip F81801_DIO_v0.2_x64_Bin_W.zip]<br /> | [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/F81801_DIO/windows_base/F81801_DIO_v0.2_x64_Bin_W.zip F81801_DIO_v0.2_x64_Bin_W.zip]<br /> | ||
| + | |||
| + | Google Drive: [https://drive.google.com/drive/folders/1NOnfy3Z-ePQpaU45tYMxOf16r264qAVs?usp=sharing F81801 DIO under Windows] | ||
== How to use this Demo Application == | == How to use this Demo Application == | ||
Revision as of 08:16, 15 February 2022
Contents |
The Sample code source you can download from
Source file: F81801_DIO_v0.2_Src_W.zip
Binary file: F81801_DIO_v0.2_x86_Bin_W.zip
F81801_DIO_v0.2_x64_Bin_W.zip
Google Drive: F81801 DIO under Windows
How to use this Demo Application
Introduction
F81801 OPEN
BOOL F81801U_Open()
{
SetPortVal(0x2e, 0x87, 1);
SetPortVal(0x2e, 0x87, 1);
if (F81801U_Read(CHIP_ID_REGISTER1) == CHIP_ID_DEFAULT_VALUE1 && F81801U_Read(CHIP_ID_REGISTER2) == CHIP_ID_DEFAULT_VALUE2)
return TRUE;
return FALSE;
}
F81801 CLOSE
void F81801U_Close()
{
SetPortVal(0x2e, 0xaa, 1);
}
Initial internal F81801
void F81801U_Init()
{
F81801U_Write(Logic_Device_Number_Register, GPIO_Device_Configuration_Registers);// GPIO Device Configuration Registers (LDN CR06)
F81801U_Write(GPIO3_Output_Enable_Register, 0xf0);//GPIO34~GPIO37 OUTPUT SET / GPIO30~GPIO33 INPUT SET
F81801U_Write(GPIO3_Drive_Enable_Register, 0xf0);//GPIO34~GPIO37 DRIVE SET
F81801U_Write(Logic_Device_Number_Register, WDT_Registers);
F81801U_Write(WDTDE, 0x01);
F81801U_Write(WDT_REG1, 0x40);
F81801U_Write(WDOUT_EN, 0x80);
}
F81801U READ
DWORD F81801U_Read(DWORD dwAddrVal)
{
DWORD dwPortVal;
::SetPortVal(0x2e, dwAddrVal, 1);
::GetPortVal(0x2f, &dwPortVal, 1);
return (dwPortVal & 0x00FF);
}
F81801U WRITE
void F81801U_Write(DWORD dwAddrVal, DWORD dwPortVal)
{
::SetPortVal(0x2e, dwAddrVal, 1);
::SetPortVal(0x2f, dwPortVal, 1);
}
F81801U GetDigitalInput
BYTE F81801U_GetDigitalInput()
{
CString tmp;
BYTE byteGPIO3X = 0;
BYTE byteData = 0;
byteGPIO3X = F81801U_Read(GPIO3_Pin_Status_Register);
byteData = byteGPIO3X & 0x0F;
return byteData;
}
F81801U SetDigitalOutput
void F81801U_SetDigitalOutput(BYTE byteValue)
{
BYTE byteData = 0;
byteData = (byteValue & 0x01) ? byteData + 0x10 : byteData;
byteData = (byteValue & 0x02) ? byteData + 0x20 : byteData;
byteData = (byteValue & 0x04) ? byteData + 0x40 : byteData;
byteData = (byteValue & 0x08) ? byteData + 0x80 : byteData;
F81801U_Write(GPIO3_Output_Data_Register, byteData);
}
