請先看『使用說明』
Module:M954B/M954C module under Linux
From LEXWiKi
(→1.First you need to know which mode do you want and check device jump to the correct mode) |
(→1.First you need to know which mode do you want and check device jump to the correct mode) |
||
| Line 124: | Line 124: | ||
== How to use M954B/M954C driver == | == How to use M954B/M954C driver == | ||
| - | === 1.First | + | === 1.First jump mode === |
| - | + | you need to know which mode do you want and check device jump to the correct mode | |
| + | [[Image:M954C_JUMP.JPG]] | ||
=== 2.Second confirm your transmittal mode === | === 2.Second confirm your transmittal mode === | ||
Revision as of 15:28, 6 February 2023
| OS | Kernrl | Module | baudrate | TEST Mode | Driver | Download |
|---|---|---|---|---|---|---|
|
Ubuntu 18.04.3 |
4.18.0-25-generic |
M954C |
9600/38400/115200 |
RS485 |
AX99100 v1.6 | |
|
Ubuntu20.04.3 Lts |
5.13.0-28-generic |
M954C |
9600/38400/115200 |
RS485 |
AX99100 v1.8 | |
|
Debian 8.11.1 amd64 |
3.16.0.6-amd64 |
M954B |
9600/38400/115200 |
RS485 |
AX99100 v1.6 | |
|
Debian 9.4 |
4.9.0.14-amd64 |
M954B |
9600/38400/115200 |
RS485 |
AX99100 v1.6 | |
|
OpenSUSE Tumbleweed 15.2 |
5.10.9-1-default |
M954B |
9600/38400/115200 |
RS485 |
AX99100 v1.6 | |
|
Debian 9.13 |
4.9.0-16-amd64 |
M954B |
9600/38400/115200 |
RS485 |
AX99100 v1.6 | |
|
Debain 10.10 |
4.19.0-17-amd64 |
M954B |
9600/38400/115200 |
RS485 |
AX99100 v1.6 |
Contents |
How to use M954B/M954C driver
1.First jump mode
you need to know which mode do you want and check device jump to the correct mode
2.Second confirm your transmittal mode
After your confirm
Edit ax99100_sp.c code to your requirement(default is RS232)
For example if you want to test RS485 half duplex so you need to change the code uart mode
//Port1/Port2/Port3/Port4 .uart_mode= AX99100_RS485_HALF_DUPLEX,
You have 4 ports ,so you need to change code port1-port4 uart mode
