請先看『使用說明』
IO Device:F81801 DIO under Windows
From LEXWiKi
(Difference between revisions)
(→The Sample code source you can download from) |
|||
| Line 1: | Line 1: | ||
[[Category:AllowPages]] | [[Category:AllowPages]] | ||
== The Sample code source you can download from == | == The Sample code source you can download from == | ||
| - | + | <!-- | |
<Google Drive> | <Google Drive> | ||
| Line 8: | Line 8: | ||
Binary file: [https://drive.google.com/file/d/16De8328hxGKQYdu01cwSAUrlsU4tIchL/view?usp=sharing F81801_DIO_v0.2W_Bin_x86] | Binary file: [https://drive.google.com/file/d/16De8328hxGKQYdu01cwSAUrlsU4tIchL/view?usp=sharing F81801_DIO_v0.2W_Bin_x86] | ||
[https://drive.google.com/file/d/12GDMH9O7fmINhEr3Vc42-k6c9mZEBq1v/view?usp=sharing F81801_DIO_v0.2W_Bin_x64]<br /> | [https://drive.google.com/file/d/12GDMH9O7fmINhEr3Vc42-k6c9mZEBq1v/view?usp=sharing F81801_DIO_v0.2W_Bin_x64]<br /> | ||
| + | --> | ||
<FTP> | <FTP> | ||
Current revision
Contents |
The Sample code source you can download from
<FTP>
Source file: F81801_DIO_v0.2W_Src
Binary file: F81801_DIO_v0.2W_Bin_x86
F81801_DIO_v0.2W_Bin_x64
How to use this Demo Application
Introduction
F81801 OPEN
BOOL F81801U_Open()
{
SetPortVal(0x2e, 0x87, 1);
SetPortVal(0x2e, 0x87, 1);
if (F81801U_Read(CHIP_ID_REGISTER1) == CHIP_ID_DEFAULT_VALUE1 && F81801U_Read(CHIP_ID_REGISTER2) == CHIP_ID_DEFAULT_VALUE2)
return TRUE;
return FALSE;
}
F81801 CLOSE
void F81801U_Close()
{
SetPortVal(0x2e, 0xaa, 1);
}
Initial internal F81801
void F81801U_Init()
{
F81801U_Write(Logic_Device_Number_Register, GPIO_Device_Configuration_Registers);// GPIO Device Configuration Registers (LDN CR06)
F81801U_Write(GPIO3_Output_Enable_Register, 0xf0);//GPIO34~GPIO37 OUTPUT SET / GPIO30~GPIO33 INPUT SET
F81801U_Write(GPIO3_Drive_Enable_Register, 0xf0);//GPIO34~GPIO37 DRIVE SET
F81801U_Write(Logic_Device_Number_Register, WDT_Registers);
F81801U_Write(WDTDE, 0x01);
F81801U_Write(WDT_REG1, 0x40);
F81801U_Write(WDOUT_EN, 0x80);
}
F81801U READ
DWORD F81801U_Read(DWORD dwAddrVal)
{
DWORD dwPortVal;
::SetPortVal(0x2e, dwAddrVal, 1);
::GetPortVal(0x2f, &dwPortVal, 1);
return (dwPortVal & 0x00FF);
}
F81801U WRITE
void F81801U_Write(DWORD dwAddrVal, DWORD dwPortVal)
{
::SetPortVal(0x2e, dwAddrVal, 1);
::SetPortVal(0x2f, dwPortVal, 1);
}
F81801U GetDigitalInput
BYTE F81801U_GetDigitalInput()
{
CString tmp;
BYTE byteGPIO3X = 0;
BYTE byteData = 0;
byteGPIO3X = F81801U_Read(GPIO3_Pin_Status_Register);
byteData = byteGPIO3X & 0x0F;
return byteData;
}
F81801U SetDigitalOutput
void F81801U_SetDigitalOutput(BYTE byteValue)
{
BYTE byteData = 0;
byteData = (byteValue & 0x01) ? byteData + 0x10 : byteData;
byteData = (byteValue & 0x02) ? byteData + 0x20 : byteData;
byteData = (byteValue & 0x04) ? byteData + 0x40 : byteData;
byteData = (byteValue & 0x08) ? byteData + 0x80 : byteData;
F81801U_Write(GPIO3_Output_Data_Register, byteData);
}
