請先看『使用說明』
EWF Module
From LEXWiKi
(Difference between revisions)
(→How to use the DEMO application) |
|||
Line 8: | Line 8: | ||
== How to use the DEMO application == | == How to use the DEMO application == | ||
+ | |||
+ | [[Image:Example.jpg]] | ||
1&2.Choose the EWF partition. | 1&2.Choose the EWF partition. | ||
- | 3. | + | 3.Enable EWF. |
- | 4. | + | 4.Disable EWF. |
- | 5. | + | 5.Commit EWF-Can do change on OS without reboot.When DISK mode,the layer will set to 1. |
- | 6. | + | 6.Clear the command which you chose. |
- | 7. | + | 7.Show the drive information. |
- | 8.Show the | + | 8.Show the EWF information. |
- | 9. | + | 9.Reboot. |
- | 10. | + | 10.After choose the EWF partition,here will show the EWF infomation. |
11.You can set checkpoint when DISK mode. | 11.You can set checkpoint when DISK mode. |
Revision as of 17:58, 9 September 2009
EWF Manager
The Sample code source you can download form
Source file: EWF_Manager_v1.5_Src.rar
Binary file: EWF_Manager_v1.5_Bin.rar
How to use the DEMO application
1&2.Choose the EWF partition.
3.Enable EWF.
4.Disable EWF.
5.Commit EWF-Can do change on OS without reboot.When DISK mode,the layer will set to 1.
6.Clear the command which you chose.
7.Show the drive information.
8.Show the EWF information.
9.Reboot.
10.After choose the EWF partition,here will show the EWF infomation.
11.You can set checkpoint when DISK mode.
12.Choose the layer which you want to restore.
13.You can restore the system when DISK mode.
14.Go to layer1 , and the other layer will disappear.