請先看『使用說明』

From LEXWiKi

Revision as of 13:54, 11 September 2009

EWF Manager

The Sample code source you can download form

Source file: EWF_Manager_v1.5_Src.rar

Binary file: EWF_Manager_v1.5_Bin.rar

How to use the DEMO application

1&2.Choose the EWF partition.

3.Enable EWF.

4.Disable EWF.

5.Commit EWF-In RAM-Reg mod:Can do change on OS without reboot.In DISK mode,the layer will set to 1.

6.Clear the command which you chose.

7.Show the drive information.

8.Show the EWF information.

9.Reboot.

10.After choose the EWF partition,here will show the EWF infomation.

11.You can set checkpoint when DISK mode.

12.Choose the layer which you want to restore.

13.You can restore the system when DISK mode.

14.Go to layer1 , and the other layer will disappear.

Sample code Introduction

Do EWF Enable

DWORD CEWF::DoEwfEnable(LPCWSTR szProVolName,BOOL bReboot) 
{
    DWORD dwStatus = ERROR_SUCCESS;
    HANDLE hProVol = INVALID_HANDLE_VALUE;
    BOOL bResult = FALSE;
 
    // Use the volume name to open a handle to this protected volume.
    hProVol = EwfMgrOpenProtected(szProVolName);

    EwfMgrEnable(hProVol);
	
    // This command requires a reboot to take effect.
    if (bReboot) DoReboot();
 	
    return dwStatus;	
}

Do EWF Disable

DWORD CEWF::DoEwfDisable(LPCWSTR szProVolName , BOOL fCommit, BOOL bReboot) 
{	
    DWORD dwStatus = ERROR_SUCCESS;
    HANDLE hProVol = INVALID_HANDLE_VALUE;
    BOOL bResult = FALSE;

    // Use the volume name to open a handle to this protected volume.
    hProVol = EwfMgrOpenProtected(szProVolName);

    EwfMgrDisable(hProVol,fCommit);

    // This command requires a reboot to take effect.
    if (bReboot) DoReboot();

    return dwStatus;
}

Do EWF Commit

DWORD CEWF::DoEwfCommit (LPCWSTR szProVolName , BOOL bReboot) 
{
    DWORD dwStatus = ERROR_SUCCESS;
    HANDLE hProVol = INVALID_HANDLE_VALUE;
    BOOL bResult = FALSE;

    // Use the volume name to open a handle to this protected volume.
    hProVol = EwfMgrOpenProtected(szProVolName);

    EwfMgrCommit(hProVol);
	    
    // This command requires a reboot to take effect.
    if (bReboot) DoReboot();
	
    return dwStatus;
}

Do Set checkpoint

DWORD CEWF::DoEwfCheckPoint (LPCWSTR szProVolName, BOOL bReboot) 
{
    DWORD dwStatus = ERROR_SUCCESS;
    HANDLE hProVol = INVALID_HANDLE_VALUE;
    BOOL bResult = FALSE;
	
    // Use the volume name to open a handle to this protected volume.
    hProVol = EwfMgrOpenProtected(szProVolName);

    EwfMgrCheckpoint(hProVol,L"Optional description");

    // This command requires a reboot to take effect.
    if (bReboot) DoReboot();

    return dwStatus;
}

Do Restore

DWORD CEWF::DoEwfRestore(LPCWSTR szProVolName, BOOL bReboot) 
{
    DWORD dwStatus = ERROR_SUCCESS;
    HANDLE hProVol = INVALID_HANDLE_VALUE;
    BOOL bResult = FALSE;

    // Use the volume name to open a handle to this protected volume.
    hProVol = EwfMgrOpenProtected(szProVolName);
	
    EwfMgrRestore(hProVol);
    
    // This command requires a reboot to take effect.
    if (bReboot) DoReboot();
	
    return dwStatus;
}

Do EWF SetLevel

DWORD CEWF::DoEwfSetLevel(LPCWSTR szProVolName , BOOL bReboot) 
{
    DWORD dwStatus = ERROR_SUCCESS;
    HANDLE hProVol = INVALID_HANDLE_VALUE;
    BOOL bResult = FALSE;

    // Use the volume name to open a handle to this protected volume.
    hProVol = EwfMgrOpenProtected(szProVolName);

    EwfMgrSetLevel(
               hProVol,
               L"Optional Description",
               0,        // Level zero to be restored back to the protected volume.
               FALSE);   // Cannot delete the protected volumes data.
    // This command requires a reboot to take effect.
    if (bReboot) DoReboot();

    return dwStatus;
}