請先看『使用說明』

From LEXWiKi

Revision as of 10:45, 10 August 2010

eWatcher Introduction

eWatcher was our DVR System support project ,That's support the SI945 /SI510 /SI555 and M878 (1v4,1v2,2v2 version),
If customer need to DEMO our DVR system ,Please select eWatcher Server that's complete DVR solution for our 878 series!!
If customer need to Develop their Video System ,Please select eWatcher SDK for second engineering!!

eWatcher Server

That's our complete DVR solution for 878 series include eWatcher server and Remote viewer for IE and Mobile phone!!

You can download form

eWatcher SDK

You can got SDK version when you install the eWatcherSDK.exe

eWatcher SDK Programming guide

This page for customer second engineering programming,
We provide the fews function code which include
a.MJPEG Codec for Record
b.Motion Detection function code for alarm
c.1 chip for 4 channels or 1 chip for 1 channel Preview function code

使用說明

1. 開啟AMCap.exe，點選工作列【Option】→【Video Crossbar...】，開啟Properties視窗（圖1）。

   Image:MotionDemo a01.JPG
   圖1

   點選【0:Video Tuner In】，點選【Ok】離開。

2. 點選工作列【Option】→【Video Capture Filter...】，開啟Properties視窗（圖2）。

   Image:MotionDemo a02.JPG
   圖2

   在Video Decoder的Video Standard點選【NTSC_M】（依使用鏡頭類型選擇），點選【Ok】離開。

3. 重複1,2步驟直到有畫面正常顯示，再關閉AMCap.exe。
4. 進入motion_demo資料夾，執行install.bat檔案。
5. 執行MotionDetectionDemo.exe，程式會自動跳出錄影畫面，右鍵點選右下角圖示開啟右鍵選單（圖3）。

   Image:MotionDemo a03.JPG
   圖3

   點選【Configuration】開啟Configuration視窗（圖4）。

   Image:MotionDemo a04.JPG
   圖4

   點選【Select All】即可動態偵測所有錄影畫面，點選【Ok】離開，當畫面產生變化時程式會自動跳出錄影畫面。

6. Configuration視窗各項功能定義:
   • Sensitive:數字愈高，靈敏度愈低。
   • Stay Time:動態感應後，錄影畫面停留時間（單位：秒）。
   • Add New Zone:手動增加想動態偵測的畫面區塊。
   • Clear All:清除所有偵測區塊。
   • Select All:選擇偵測所有錄影畫面。