MB:CI945C

• Celeron M processor ULV: 423
• Celeron M processor: 440, 530, 550
• Core Duo processor LV: L2400
• Core Duo processor: U2500, T2500
• Core 2 Duo processor: L7400, T7400
• Core 2 Duo processor ULV: U7500

N/A

N/A

Eric Wu 18:07, 21 April 2008 (CST)

Eric Wu 18:07, 21 April 2008 (CST)

#vi /boot/grub/menu.lst

Add "8250.nr_uarts=6" in the kernel line as below picture:

(In Fedora)

(In Ubuntu)

#reboot

And then you can use 6 COM ports.

N/A

N/A

Patty 17:12, 6 March 2009 (CST)

Patty 17:12, 6 March 2009 (CST)

Fedora 10 & Ubuntu 8.10:
yes, in Fedora 10 & ubuntu 8.10, using vesa driver to set dual head check xorg.conf for detail.

Ubuntu 10.04:
In Ubuntu 10.04 ,The xorg.conf should be created myself:

   1.CTRL+ALT+F1 //into text mode
   2.login as root
   3.#service gdm stop
   4.#X -configure //Create xorg.conf file
   5.#vi xorg.conf.new  
   6.Refer below to modify driver become vesa and resolution 1280*1024 

   7.cp xorg.conf.new /etc/X11/xorg.conf
   8.service gdm start
   9.login as root and install touch(PenMount) driver.
   10.After install process , logout and login again.
 

xorg.conf

N/A

Denny 2009/04/06

Denny 2009/04/06

No,The Kerenl 2.4.x like Redhat9 Kerenl 2.4.20.8 It's too old to support 8111C,
So We strong recommand to Install 8111C driver module by manual
You can got 8111C driver in below Patch File!

RT8111C Driver

N/A

Scott 2009/10/16

Leon 2009/10/16

1.install RTL8111c driver
2.Add or modify your "ifcfg-ethx" ethernet port config file
example:using DHCP on Eth1 port.

   DEVICE=eth1
   BOOTPROTO=dhcp
   HWADDR=XX:XX:XX:XX:XX:XX  #MAC address
   ONBOOT=yes

3.check your network states in runlevel 3 and 5

   #chkconfig --list | grep network    
   if network states are closed in runlevel 3 or 5
   #chkconfig --level (5or3) network on

• Lan

N/A

Steve 2010/05/13

Steve 2010/05/13

Please follow the following steps:

1.Switch to console mode:

$Ctrl+Alt+F1

2.After login with root, edit grub.conf:

$vi /boot/grub/grub.conf

3.Delete "rhgb quiet" in the kernel line:

origin:
title CentOS (2.6.18-194.el5)
	root (hd0,2)
	kernel /boot/vmlinuz-2.6.18-194.el5 ro root=LABEL=/ rhgb quiet 
	initrd /boot/initrd-2.6.18-194.el5.img

edit to :
title CentOS (2.6.18-194.el5)
	root (hd0,2)
	kernel /boot/vmlinuz-2.6.18-194.el5 ro root=LABEL=/ 
	initrd /boot/initrd-2.6.18-194.el5.img

4.Save and reboot:

$reboot

And then you can get into X-Window.

N/A

N/A

I-Ling , 2010-07-15

Patty , 2010-07-19

In Terminal:
1.#apt-get update
2.#apt-get install lm-sensors
3.#sensors-detect
4.#vi /etc/modules
5.Insert the belows to /etc/modules

   coretemp
   it87
   i2c-viapro
   eeprom

6.#sensors

N/A

N/A

"Robert & 2010/12/08"

"Steve & 2010/12/08"