請先看『使用說明』
MB:2I385HW
From LEXWiKi
(Difference between revisions)
(edited by Kk via TableEdit) |
(edited by Kk via TableEdit) |
||
| Line 101: | Line 101: | ||
| | | | ||
| + | | | ||
| + | |||
| + | |- | ||
| + | | | ||
| + | Windows 7 | ||
| + | | | ||
| + | Yes | ||
| + | | | ||
| + | Yes | ||
| + | | | ||
| + | Yes | ||
| + | | | ||
| + | Yes | ||
| + | | | ||
| + | Yes | ||
| + | | | ||
| + | Yes | ||
| + | | | ||
| + | Yes | ||
| + | | | ||
| + | Yes | ||
| + | | | ||
| + | Yes | ||
| + | | | ||
| + | Yes | ||
| + | | | ||
| + | Yes | ||
| + | | | ||
| + | Yes | ||
| + | | | ||
| + | http://www.salt.com.tw/tw/wp-content/uploads/sites/2/2015/09/PenMount-RHEL-6.0-6.6-32-64-bit-driver-V4.2.3.tar.bz2 | ||
| | | | ||
Revision as of 10:28, 6 November 2015
| O.S. | VGA | Panel | Touch | SATA | Audio(Line-Out) | LAN | USB2.0 | USB3.0 | COM | PCI-E | mSata | WDT/DIO | Download | Patch |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Ubuntu 14.04 |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes | ||
|
Fedora 21 |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes | ||
|
CentOS 6.7 |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes | ||
|
Windows 7 |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
FAQ
1. How to check USB 3.0 is working?
| Ans: |
Open the terminal and type：lsusb -v And check bcdUSB at your device. If shows 3.0. This port is using USB 3.0 |
|---|---|
| Asker: |
Jason 10:07, 28 Feb 2015 (CST) |
| Provider: |
Scott 15:30, 16 Mar 2015 (CST) |
2. Why I cannot scan touch device?
| Ans: |
Because this MB is using COM port touch. So it may conflict with RS232. First, You should open the COM port from 4 to 6.(or more) And Setting the COM mode from PCI to ISA in BIOS advance setting. Now you can scan the touch device and install PenMount6000 |
|---|---|
| Asker: |
Scott 13:45, 28 Mar 2015 (CST) |
| Provider: |
Scott 16:50, 1 Apr 2015 (CST) |
