請先看『使用說明』

From LEXWiKi

The Sample code source you can download from

<Google Drive>

Source file: CIO_Utility_Console_v1.6.1_Src

Binary file: CIO_Utility_Console_v1.6.1_Bin

<FTP>

Source file: CIO_Utility_Console_v1.6.1_Src

Binary file: CIO_Utility_Console_v1.6.1_Bin

MB Support List

edit table

How to use this Demo Application

1. The program must control I/O device, when you use this you must change user to root, you can use this command "sudo su"
2.enter "./CIO_Utility_console -h"show help function

Example:
CIO_Utility_console -w 1 -s h
CIO_Utility_console -r 1
CIO_Utility_console -W -s 0x0f
CIO_Utility_console -R

F75111 Layout Picture

Introduction

Initial Internal F75111 port address (0x9c)

   define GPIO1X, GPIO2X, GPIO3X to input or output 
   and Enable WDT function pin 

Base on libF75111.a API function as below list

bool	F75111_Init();
bool	F75111_4I4O_Init();
bool	F75111_8I8O_Init(); 

bool	F75111_GetDigitalInput_Pin(int);	//pin number 0-15
BYTE	F75111_GetDigitalInput();
BYTE	F75111_GetDigitalInput_4I4O();          //4I4O(CIO1)
BYTE	F75111_GetDigitalInput_8I8O();          //8I(CIO1)+8O(CIO2)

bool	F75111_SetDigitalOutput_Pin(BYTE pin_number,bool pin_status);
void	F75111_SetDigitalOutput(BYTE byteValue);
void    F75111_SetDigitalOutput_4I4O(BYTE byteValue);//20190828 add by Nico ,20200430 kk update
void	F75111_SetDigitalOutput_8I8O(BYTE byteValue);
void	F75111_SetDigitalOutput_1i1o(BYTE byteValue);//20200504 jimmy update for wet3901

BYTE	F75111_GetWDTMode();
void	F75111_SetWDTMode(BYTE dwvalue); 

void	F75111_SetWDTEnable    (BYTE byteTimer);
void	F75111_SetWDTDisable   ();