F81966 Watchdog Service under Windows

From LEXWiKi

Revision as of 15:06, 17 December 2024 by Eric (Talk | contribs)
Jump to: navigation, search


Contents

The binary file you can download from

<Google Drive>

Binary file(64 bit): LEX_WatchDog_Service_Ver1.1.12.20

Manuual Guide: Manuual Guide


How to install Watchdog service tool

Step1. Click “setup” file to install watchdog service.
Image:WDT_S_AA00001-1.png

Step2. Keep Click ”Next” to complete the installation.
Image:WDT_S_AA00002.png

Step3. If service is successfully installed, service will auto start.


How to modify Watchdog timer setting

Step1. Click “LEX WDT CFG Editor” short cut on your desktop.
Image:WDT_S_AA00003.png

Step2. Open editor there are 3 parameters can be setup.
Image:WDT_S_AA00004.png

  • 1. COUNT MODE : Set WDT timer countdown unit is “second” or “minute”. The default setting is “second”.
  • 2. COUNT TIME : How much time that system will reboot after system were crashed. The default setting is 2 seconds.
  • 3. RELOAD : How much time that watchdog time would reload. The default setting is 1 seconds.
  • 4. DO HIGH : How much time that DO pin turn to “HIGH” when windows logon (as pic2). The default setting is 35 seconds.

Image:WDT S AA0005-1.pngImage:WDT S AA0005-2.png

Step3. Press “OK” button to update setting.


How to disable service process

Step1. Open windows “Service.exe”, as shown below.
Image:WDT_S_AA00006.png

Step2. Find “LEX Watchdog Service” service. And right click to open menu and select “Properties” as shown below.
Image:WDT_S_AA00007.png

Step3. Drop down “Startup type” menu. Select “Disabled” will freeze “LEX Watchdog Service”. Select “Automatic” service will start at system startup.
Image:WDT_S_AA00008.png

Step4. Press “OK” button to update setting. And reboot your windows system.


Uninstall Watchdog service tool

Step1. Use the windows default “uninstall a program” tool. And uninstall “LEX Watchdog Service” as shown below.
Image:WDT_S_AA00009.png

Step2. During the software release process, if the following screen pops up, click “OK” as shown below.
Image:WDT_S_AA00010.png

Step3. Reboot your windows system to finish uninstall.


COM

COM port功能測試，可支援"RS232"、"RS422"、"RS485"、"M303"
Image:MAT_AA00008-1.png

  • 5-1. COM測試結果，同時以圖形方式顯示狀態
  • 5-2. 指定此COM port以何種協議去進行測試: 支援RS232、RS422、RS485
  • 5-3. 指定此COM port，是否以auto flow(RS232 to RS485)的方式去進行測試

測試完成結果(QR code)

測試完成時，會產生各項目簡單測試結果視窗，並產生4個QR code，分別記載各項目的測試結果，
配合"Auto Report Tool"可生成EXCEL報表
Image:MAT_AA00009.png


測試完成結果(Log)

測試完成時，會產生各項目簡單測試的Log文件，存放在特定目錄夾，可藉由工具將指定Log還原成QR code，
配合"Auto Report Tool"生成EXCEL報表
Image:MAT_AA000010.png

  • 6-1. 展開存放Log文件的目錄夾位置
  • 6-2. 選取指定Log檔案，還原成QR code

Image:MAT_00002-7.png

Retrieved from "http://tprd.info/lexwiki/index.php/F81966_Watchdog_Service_under_Windows"
Personal tools