DPC Module:Brightness setting utility under DOS

From LEXWiKi

Revision as of 11:59, 22 November 2011 by Sylviachang (Talk | contribs)
Jump to: navigation, search


DPC_Dos Utility Download

This utility is used to set brightness rapidly, and use with batch file at mass production.

Download Binary file: DPC_DOS_v1.0 Binary

How to Use

command:
command:

/s Num1 Num2  
-Setting panel frequency and duty cycle.
  • Num1 is "Panel Frequency", and Num2 is "Duty Cycle". The unit of panel frequency is "Hz", and the range of duty cycle is "0~100".
/VX900  
-If CPU is VX900, you have to add this parameter.
/h  
-Goto DPC_Dos v1.0 Manual.

For example: If a panel's frequency is 20kHz and you want to set 50 as its duty cycle. you can use this command as follow.

DPCDOS /s 20000 50
  • Be careful that some panels' duty cycle are decrease, the default duty cycle is 100. And others' default duty cycle are increase, its duty cycle is 0.


Retrieved from "http://tprd.info/lexwiki/index.php/DPC_Module:Brightness_setting_utility_under_DOS"
Personal tools