請先看『使用說明』
MB:2I385HW
From LEXWiKi
| O.S. | VGA | Panel | Touch | SATA | Audio(Line-Out) | LAN | USB2.0 | USB3.0 | COM | PCI-E | mSata | WDT/DIO | Download | Patch |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Ubuntu 14.04 |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes | ||
|
Fedora 21 |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes | ||
|
CentOS 6.7 |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Contents |
FAQ
1. How to check USB 3.0 is working?
| Ans: |
Open the terminal and type：lsusb -v And check bcdUSB at your device. If shows 3.0. This port is using USB 3.0 |
|---|---|
| Asker: |
Jason 10:07, 28 Feb 2015 (CST) |
| Provider: |
Scott 15:30, 16 Mar 2015 (CST) |
2. Why I cannot scan touch device?
| Ans: |
Because this MB is using COM port touch. So it may conflict with RS232. First, You should open the COM port from 4 to 6.(or more) And Setting the COM mode from PCI to ISA in BIOS advance setting. Now you can scan the touch device and install PenMount6000 |
|---|---|
| Asker: |
Scott 13:45, 28 Mar 2015 (CST) |
| Provider: |
Scott 16:50, 1 Apr 2015 (CST) |
3.Linux audio is not loud enough , how can I do?
| Ans: |
You can try #sudo alsamixer adjust it as below:
|
|---|---|
| Patch File: |
N/A |
| Defect: |
N/A |
| Asker: |
Leon Hsu 2010/03/09 |
| Provider: |
Patty Chen 2010/03/10 |
3.The eDP flashes, how can I do?
| Ans: |
You can try #sudo alsamixer adjust it as below:
|
|---|---|
| Patch File: |
N/A |
| Defect: |
N/A |
| Asker: |
Leon Hsu 2010/03/09 |
| Provider: |
Patty Chen 2010/03/10 |
