請先看『使用說明』

From LEXWiKi

The Sample code source you can download from

Source file: F75113V2.5.1L_src.tar.gz

Binary file: F75113v2.5.1L_bin.tar.gz

We do the demo test with a test tool which DIx connect to DOx with Relay. 

MB Support List

edit table

How to use this Demo Application

1. Press the "Start" button to test CIO1 function

2. Press the "Start" button to test CIO2 function

3. Press the "Start" button to test CIO3 function

4. Press the "Start" button to test CIO4 function

5. Press the "Enable" button to test WDT function

If you need to use the WDT,Please use "sh F75113set.sh"

He can help you set the WDT register for normal use WDT

F75113 GPIO Picture

Introduction

GPIO Status Register Write

init_fintek_sio(eSIO_TYPE_F75113, 0 ,&sio_data)
ActiveSIO(sio_data.ic_port, sio_data.key);
CHECK_RET(_EnableGPIO(0x06 , eGPIO_Mode_Enable));
CHECK_RET(_SetGpioOutputEnableIdx( 0x06 , eGPIO_Direction_Out));
CHECK_RET(_SetGpioDriveEnable( 0x06 , eGPIO_Drive_Mode_OpenDrain));
CHECK_RET(_SetGpioOutputDataIdx( 0x06 , 1));
DeactiveSIO(sio_data.ic_port);

GPIO Status Register Read

init_fintek_sio(eSIO_TYPE_F75113, 0 ,&sio_data)
ActiveSIO(sio_data.ic_port, sio_data.key);
CHECK_RET(_EnableGPIO(0x06 , eGPIO_Mode_Enable));
CHECK_RET(_SetGpioOutputEnableIdx( 0x06 , eGPIO_Direction_In));
CHECK_RET(_GetGpioInputDataIdx( 0x06 , &data));
DeactiveSIO(sio_data.ic_port);

GPIO Comparison

 CHECK_RET(_GetGpioInputDataIdx (0x10,&BDIO_data));
 if((BDIO_data == 1) & (BDIO_startvalue_data == 0) )
 {
    gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(checkbutton2), TRUE);
 }
 CHECK_RET(_GetGpioInputDataIdx (0x11,&BDI1_data));
 if((BDI1_data == 1) & (BDI1_startvalue_data == 0) )
 {
    gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(checkbutton4), TRUE);
 }
 CHECK_RET(_GetGpioInputDataIdx (0x12,&BDI2_data));
 if((BDI2_data == 1) & (BDI2_startvalue_data == 0) )
 {
    gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(checkbutton6), TRUE);
 }
 CHECK_RET(_GetGpioInputDataIdx (0x13,&BDI3_data));
 if((BDI3_data == 1) & (BDI3_startvalue_data == 0) )
 {
    gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(checkbutton8), TRUE);
 }

F75113 driver delete

 on_window1_destory         (GtKObject    *object,
                           gpointer      user_data)
 {
   int nRet = 0;
   sFintek_sio_data sio_data;
   set_debug(1);
   if( nRet = init_fintek_sio(eSIO_TYPE_F75113,0, &sio_data))
   {
       fprintf(stderr,"init_fintek_sio error\n");
       exit(3);
   }
   ActiveSIO(sio_data.ic_port, sio_data.key);
   DeactiveSIO(sio_data.ic_port);
   gtk_main_quit();
 }