請先看『使用說明』

From LEXWiKi

edit table

How to Install F81534 driver

Fintek F81534 driver install

1.Prepare the kernel tree & compiler tools for your distribution.

    #sudo su
    #apt-get update
    #apt-get install build-essential gcc

2.unzip driver zip file (F81534-532_DriverSourceCode-<version>_Linux.zip)

1. cd F81534
2. make clean ; make ; make install
3. modprobe usbserial
4. rmmod f81534 ; insmod f81534.ko

3.check new port added by “dmesg | grep ttyUSB”.

1. reboot

How to use F81534-change Mode

1.unzip tool zip file

1. make clean ; make
2. you'll get set_mode&set_gpio in the same folder

2.Using demo application

3.Example

1. Change ttyUSB3 to RS232 Mode

1. ./set_mode ttyUSB3 1
2. ./set_gpio ttyUSB3 1

2. Change ttyUSB3 to RS485 Mode

1. ./set_mode ttyUSB3 2
2. ./set_gpio ttyUSB3 2

3. Change ttyUSB3 to RS422 Mode

1. UART Mode is don’t care.
2. ./set_gpio ttyUSB3 0

Notice:

RS485_1 / RS422_Term / RS232_coexist / RS485_Term / Shutdown mode are not test yet.(EVB)

Only test RS422(EVB)/RS232(EVB)/RS485(EVB).