請先看『使用說明』

From LEXWiKi

The Sample code source you can download form

Source file:
DPC_v2.13w_Src(32bit).zip
DPC_v2.13w_Src(64bit).zip

Binary file:
DPC_v2.13w_Bin(32bit).zip
DPC_v2.13w_Bin(64bit).zip

How to use the DEMO application

When the DPC utility starts, it will hide in the notification area, and double click the tray icon (shown as the red square in below picture), 'DPC v3.0w.exe', it will show.

1. Frequency of panel selection

2. Confirm the panel which selected

3. If you choose to save DPC setting , the setting of frequency and duty cycle will be reserved.

4. It will show the MCU version of DPC.

5. Brightness control , you can choose : 10,20,30,40,50,60,70,80,90,100.

6. Show the brightness data which you choose.

7. When click the LightOff button , the panel will become darkest.

8. Record mouse position for go to 50 when LightOff. If click the button , 13 will show , you can click anywhere which you want for light on.

9. Record hotkey for go to 10 when LightOff. If click the button , The Record Hot Key window will show.

10. When click minimized , DPC will hide and show in the notification area.

11. Reset the record of hot key and position.

12. The light on mouse position and hotkay can not use together , after you record hotkey , you can't use the position anymore.

13. First key of hotkey

15. Second key of hotkey

16. Third key hotkey

17. Confirm the hotkey which you entered

18. Show hotkey which you set.

19. Hotkey will show here.

20. If you want to exit DPC , you should click right button of mouse on the icon and choose exit.

Sample code Introduction

Define SMBus regester

#define SMBUSPORT		0x0500
#define	HST_STS			SMBUSPORT+0x00
#define	HST_CNT			SMBUSPORT+0x02
#define	HST_CMD			SMBUSPORT+0x03
#define	XMIT_SLVA		SMBUSPORT+0x04
#define	HST_D0			SMBUSPORT+0x05
#define bSize			1
#define SADD			0xb0
#define PWMFeq			0x01
#define PWMDuty			0x02

Set Frequency data

DWORD dwPortVal;
bool bResult;
bResult = InitializeWinIo();

if (bResult){
     SetPortVal(HST_STS, 0xFE, bSize); //start
     Sleep(20);
     SetPortVal(XMIT_SLVA, SADD, bSize); //set
     Sleep(20);
     SetPortVal(HST_CMD, PWMFeq, bSize); //set frequency
     Sleep(20);
     GetPortVal(HST_STS, &dwPortVal, bSize);
     Sleep(20);
     dwPortVal = dwPortVal & 0x01;
     if (dwPortVal == 0){
          SetPortVal(HST_D0, fvalue, bSize); //write data into frequency
          Sleep(20);
          SetPortVal(HST_CNT, 0x48, bSize); //stop
          Sleep(20);
          ShutdownWinIo();
     }
     else
          ShutdownWinIo();
}
ShutdownWinIo();

Set Duty data

UpdateData(TRUE);
DWORD dwPortVal;
bool bResult;
bResult = InitializeWinIo();

if (bResult){
     SetPortVal(HST_STS, 0xFE, bSize); //start
     Sleep(20);
     SetPortVal(XMIT_SLVA, SADD, bSize); //set 
     Sleep(20);
     SetPortVal(HST_CMD, PWMDuty, bSize); //set duty
     Sleep(20);
     GetPortVal(HST_STS, &dwPortVal, bSize);
     Sleep(20);
     dwPortVal = dwPortVal & 0x01;
     if (dwPortVal == 0){
          if (inverter == false)
               SetPortVal(HST_D0, dvalue * 10 , bSize); //write data into data
          else if (inverter == true)
               SetPortVal(HST_D0, (10 - dvalue) * 10 , bSize); 
          Sleep(20);
   	   SetPortVal(HST_CNT, 0x48, bSize); //stop
          Sleep(20);
          ShutdownWinIo();
     }
     else
          ShutdownWinIo();
}
ShutdownWinIo();