DPC Module:DPC under Windows

From LEXWiKi

Revision as of 14:44, 6 April 2009 by PattyChen (Talk | contribs)
Jump to: navigation, search

Contents

DPC Module Spec

The Sample code source you can download form

Source file: DPCv2.4wSrc.rar

Binary file: DPC_v2.4w.rar

How to use the DEMO application

Image:DPC_AP_1.jpg

1. When double click "DPC v2.4w.exe",it will hide and show in the notification area.

Image:DPC_AP_2.jpg

2. Panel selection

3. Confirm the panel which selected

4. If you choose to save panel , you need not to select panel again next time.

5. If you install DPC v2.4w , it will autorun when start Windows XP.

6. If you don't want to use DPC anymore , you can uninstall it.

7. Brightness control , you can choose : 10,20,30,40,50,60,70,80,90,100.

8. Show the brightness data which you choose.

9. When click the LightOff button , the panel will become darkest.

10. Record mouse position for go to 10 when LightOff. If click the button , 13 will show , you can click anywhere which you want for light on.

11.


Image:DPC_AP_3.jpg
Image:DPC_AP_4.jpg
Image:DPC_AP_5.jpg


  1. Close COM Port
  2. UP line message
  3. LOW line message
  4. UP line message send to LCM device
  5. LOW line message send to LCM device
  6. Check LCM all pixel work

Sample code Introduction

Open COM Port Device

In Sample code /LCD_CTLDlg.cpp lin 157 

  if(m_SerialPort.InitPort(this,nPort,9600,'N',8,1,EV_RXFLAG|EV_RXCHAR,512)) //Set LCM to 9600.n.8.1
  {
  m_SerialPort.StartMonitoring(); //Open Com port monitoring
  m_bSerialPortOpened=TRUE; //Set COM port open 
  }

Close COM Port Device

In Sample code /LCD_CTLDlg.cpp lin 171 

  m_SerialPort.ClosePort(); //Set COM port close
  m_bSerialPortOpened=FALSE;

Send the UP line message to LCM Device

In Sample code /LCD_CTLDlg.cpp lin 183 

  if(!m_bSerialPortOpened) return; //check the com port was open
  UpdateData(TRUE);
  char szSend[30] = {0x1b, 0x51, 0x41}; //0x1b , 0x51 ,0x41 for LCM send UPline command
  sprintf(szSend+3, "%s\r", m_Sendmsg);
  m_SerialPort.WriteToPort(szSend); //Write command and message to LCM device

Send the LOW line message to LCM Device

In Sample code /LCD_CTLDlg.cpp lin 215 

  UpdateData();
  char szSend[30] = {0x1b, 0x51, 0x42}; //0x1b , 0x51 ,0x42 for LCM send LOWline command
  sprintf(szSend+3, "%s\r", m_Sendmsg2);
  m_SerialPort.WriteToPort(szSend); //Write command and message to LCM device

LCM Command list

Please check the page6 in spec file ,you can download form LCM-Spec

Retrieved from "http://tprd.info/lexwiki/index.php/DPC_Module:DPC_under_Windows"
Personal tools