IO Device:F75113 under Linux(32bit & 64bit)

From LEXWiKi

Revision as of 16:50, 15 November 2017 by Lf2nettonyboy (Talk | contribs)
Jump to: navigation, search

Contents

The Sample code source you can download from

Source file: F75113_linux_src.tar.gz

Binary file: F75113v2.0_linux_bin_x64.tar.gz

Static function library file: Fintek_GPIO&WDT&EEPROM&I2C_Linux_V1.14.zip

F75113 SPEC: F75113_V0.17P.pdf 

We do the demo test with a test tool which DIx connect to DOx with Relay.

How to use this Demo Application

Image:F75113_linux.jpg

1. Press the "Start" button to test CIO1 function

2. Press the "Start" button to test CIO2 function

3. Press the "Start" button to test CIO3 function

4. Press the "Start" button to test CIO4 function

5. WDT is not run because MB not have F75113 and WDT_RST-

F75113 GPIO Picture

Image:t5.jpg

Introduction

GPIO Status Register Write 

init_fintek_sio(eSIO_TYPE_F81866, 0 ,&sio_data)
ActiveSIO(sio_data.ic_port, sio_data.key);
CHECK_RET(_EnableGPIO(0x06 , eGPIO_Mode_Enable));
CHECK_RET(_SetGpioOutputEnableIdx( 0x06 , eGPIO_Direction_Out));
CHECK_RET(_SetGpioDriveEnable( 0x06 , eGPIO_Drive_Mode_OpenDrain));
CHECK_RET(_SetGpioOutputDataIdx( 0x06 , 1));
DeactiveSIO(sio_data.ic_port);

GPIO Status Register Read 

init_fintek_sio(eSIO_TYPE_F81866, 0 ,&sio_data)
ActiveSIO(sio_data.ic_port, sio_data.key);
CHECK_RET(_EnableGPIO(0x06 , eGPIO_Mode_Enable));
CHECK_RET(_SetGpioOutputEnableIdx( 0x06 , eGPIO_Direction_In));
CHECK_RET(_GetGpioInputDataIdx( 0x06 , &data));
DeactiveSIO(sio_data.ic_port);

GPIO Comparison 

 CHECK_RET(_GetGpioInputDataIdx (0x10,&BDIO_data));
 if((BDIO_data == 1) & (BDIO_startvalue_data == 0) )
 {
    gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(checkbutton2), TRUE);
 }
 CHECK_RET(_GetGpioInputDataIdx (0x11,&BDI1_data));
 if((BDI1_data == 1) & (BDI1_startvalue_data == 0) )
 {
    gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(checkbutton4), TRUE);
 }
 CHECK_RET(_GetGpioInputDataIdx (0x12,&BDI2_data));
 if((BDI2_data == 1) & (BDI2_startvalue_data == 0) )
 {
    gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(checkbutton6), TRUE);
 }
 CHECK_RET(_GetGpioInputDataIdx (0x13,&BDI3_data));
 if((BDI3_data == 1) & (BDI3_startvalue_data == 0) )
 {
    gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(checkbutton8), TRUE);
 }

F75113 driver delete 

 on_window1_destory         (GtKObject    *object,
                           gpointer      user_data)
 {
    sFintek_sio_data sio_data;
    DeactiveSIO(sio_data.ic_port);
    gtk_main_quit();
 }
Retrieved from "http://tprd.info/lexwiki/index.php/IO_Device:F75113_under_Linux%2832bit_%26_64bit%29"
Personal tools