BT878 Module Driver and Demo SDK under Windows

From LEXWiKi

Jump to: navigation, search

Contents

BT878 Demo SDK Download

<Google Drive>

Binary file(32 bit): eWatcherSDK_v2.4_x86

Binary file(64 bit): eWatcherSDK_v2.4_x64

SDK Reference: eWatcherSDK_Reference download

<FTP>

Binary file(32 bit): eWatcherSDK_v2.4_x86

Binary file(64 bit): eWatcherSDK_v2.4_x64

SDK Reference: eWatcherSDK_Reference download

Notice in Install Procedure

When install our BT878 driver, if see the warning window like pictures below, please select keep to install the driver, and the driver will be install successfully.
Image:878w1.png Image:878w2.png


How to Use The Utility

Demo application start:
Image:DlgInit.png

After press the "Init" Button and verify that it's LEX's motherboard.:
Image:DlgMain.png


Initialize Info

Image:InitSec.png

Card Model Combobox
Select your BT878 model type.
Source Type Combobox
Select video's source type, and "YUY2" is recommanded.
Video Resolution Combobox
Select video's format and resolution.
Init Button
Press this after finished set "Card Model", "Source Type" and "Video Resolution". It will verify the motherboard, if it's LEX's MB, this demo application will work, and other controls will be enable.
Start Preview Button
Press the button will show the video which camera captured in the frames.


Video Info

Image:VideoSec.png

Device Num Combobox
Select the device which you want to set.
Channel Num Combobox
Select the channel which you want to set.
Get Status Button
Get current video's setting.
Get Format Button
Get current video's format setting.
Get Resolution & SrcType
Get current video's Resolution and Source type setting.
Format Combobox & Set Format Button
Select device support format, and press "Set Format" Button beside to set.


Motion Setup & Snapshot

Image:MotionSec.png

Config Button
Motion detect demo.
Snapshot to current dir Button
Save a snapshot to the current directory.

Image:MotionSetup.png


User Data Interface

Image:UserDataSec.png

There are four type to get frame data, press this button will save pictures in eWatcherSDK folder.


Watchdog & DI/DO Demo

Image:F75111Demo.png


Preview

Image:PreviewSec.png

Start Record Button
Record video data which camera captured.
Video Adjust Button
Adjust hue, contrast, brightness, saturation.
OSD Setting Button
Add some texts in the preview frame, and set texts' color, size and position.
Deinterlace Checkbox
If the image camera catched will like the picture below, you can choose operating "deinterlace" to help the image be normal.

Image:VideoAdjust.png Image:OsdSet.png

Personal tools