請先看『使用說明』

From LEXWiKi

The Sample code source you can download from

<Google Drive>

Source file: F75113_16IOv1.0.0W_Src

Binary file: F75113_16IOv1.0.0W_Bin

<FTP>

Source file: F75113_16IOv1.0.0W_Src

Binary file: F75113_16IOv1.0.0W_Bin

We do the demo test with a test tool which DIx connect to DOx with Relay.

MB Support List

edit table

How to use this Demo Application

1. Press the "Start" button to test 16IO test function, DO is Wafer1 and Wafer2(Default) or check "Revrse" change to DO is Wafer3 and Wafer4

2. Press the "Enable" button to test WDT function, if you enter 10 seconds prompt string will countdown 10 seconds after the reboot

If checked the Enable Loop WDT receives an interrupt signal after the countdown and repeats the countdown

If the next picture appears

MB no LPC or the drive placement is wrong

Drive the location for the next picture

F75113 GPIO Picture

Introduction

F75113 driver connection

 hinstLib = LoadLibrary(L"Fintek.dll");
 if (hinstLib == NULL)
 {
    if(Application->MessageBoxW(L"Load fail Fintek.dll,Continued?",L"Error",16+4)==IDNO)
    {
      Application->Terminate();
    }
      return; 
 }

GPIO Status Register Write

 SETINT2PROC ProcAdd;
 char *endptr;
 char Numbers[] = "0x20";
 char Value[] =   "0xF0";
 ProcAdd = (SETINT2PROC) GetProcAddress(hinstLib, "GPIO_LPC_W");
 if (NULL != ProcAdd)
 {
   if (! (*ProcAdd)( strtol(Numbers, &endptr, 16), strtol(Value, &endptr, 16)))
   {
     ShowMessage("Write Fail");
   }
 }

GPIO Status Register Read

 GETINT2PROC ProcAdd1;
 int datatest;
 char NRtest[] = "0x22";
 ProcAdd1 = (GETINT2PROC) GetProcAddress(hinstLib, "GPIO_LPC_R");
 if (NULL != ProcAdd1)
 {
   if (! (*ProcAdd1)( strtol(NRtest, &endptr, 16), &datatest))
   {
     ShowMessage("Read Fail");
   }
 }

GPIO Comparison

 if( data == 0xF0 )
 {
  ((CStatic *)GetDlgItem(IDC_LED_DO0))->SetBitmap(::LoadBitmap(AfxGetInstanceHandle(),MAKEINTRESOURCE(IDB_BITMAP_Green)));
  ((CStatic *)GetDlgItem(IDC_LED_DO1))->SetBitmap(::LoadBitmap(AfxGetInstanceHandle(),MAKEINTRESOURCE(IDB_BITMAP_Green)));
  ((CStatic *)GetDlgItem(IDC_LED_DO2))->SetBitmap(::LoadBitmap(AfxGetInstanceHandle(),MAKEINTRESOURCE(IDB_BITMAP_Green)));
  ((CStatic *)GetDlgItem(IDC_LED_DO3))->SetBitmap(::LoadBitmap(AfxGetInstanceHandle(),MAKEINTRESOURCE(IDB_BITMAP_Green)));	
   if( data2 == 0x01 )
   {
     ((CStatic *)GetDlgItem(IDC_LED_DI0))->SetBitmap(::LoadBitmap(AfxGetInstanceHandle(),MAKEINTRESOURCE(IDB_BITMAP_Green)));
     ((CStatic *)GetDlgItem(IDC_LED_DI1))->SetBitmap(::LoadBitmap(AfxGetInstanceHandle(),MAKEINTRESOURCE(IDB_BITMAP_Red)));
     ((CStatic *)GetDlgItem(IDC_LED_DI2))->SetBitmap(::LoadBitmap(AfxGetInstanceHandle(),MAKEINTRESOURCE(IDB_BITMAP_Red)));
     ((CStatic *)GetDlgItem(IDC_LED_DI4))->SetBitmap(::LoadBitmap(AfxGetInstanceHandle(),MAKEINTRESOURCE(IDB_BITMAP_Red)));
   }
   .....
 }

F75113 driver delete

  char N9[] = "0x10";
  char V9[] = "0x00";
  ProcAdd = (SETINT2PROC) GetProcAddress(hinstLib, "GPIO_LPC_W");
   if (NULL != ProcAdd)
    {
     if (! (*ProcAdd)( strtol(N9, &endptr, 16), strtol(V9, &endptr, 16)))
      {
       ShowMessage("Write Fail");
      }
    }
    if (hinstLib != NULL)
    {
     FreeLibrary(hinstLib);
    }