NEX-001 check function

The Sample code source bin you can download from

<FTP>

1.Use make to compile the test file. After completion, you can enter the BIN folder and execute the test program.

2.Select the model or use the scanner to read the hardware information, if there is none, you can skip

3.Select the function to test

Note: NEX-001 cannot use functions 4, 5, and 6

1. You need a device to receive the signal. We use RS485 to RS232 as a test tool

2. Check the CCA1 signal and connect it correctly

3.In the program, select ALL TEST to see that the COM option is correct when it is completed

1.A parallel line is needed to connect can0 and can1 with DuPont line

2.Check the CCA1 signal and connect it correctly

3.In the program, select ALL TEST or Test Felxcan to see that the CAN option is correct when it is completed