IO Device:IntelDIO

From LEXWiKi

(Difference between revisions)
Jump to: navigation, search
Current revision (12:44, 25 February 2022) (edit) (undo)
(→The Sample code source you can download from)
 
(9 intermediate revisions not shown.)
Line 1: Line 1:
[[Category:AllowPages]]
[[Category:AllowPages]]
 +
 +
== Introduction ==
 +
=== Define Pin Address ===
 +
#define INTEL_WDTE 0x600
 +
#define INTEL_WDTD 0x604
 +
#define INTEL_DI 0x608
 +
#define INTEL_DO 0x60C
 +
 +
=== Initialize WinIO & Uninitializ WinIO ===
 +
InitializeWinIo()
 +
ShutdownWinIo()
 +
 +
=== Set DI/DO ===
 +
DO: DIO_Write(BYTE dwDataVal)
 +
{
 +
SetPortVal(INTEL_DO, dwDataVal, 1);
 +
}
 +
DI: DIO_Read()
 +
{
 +
DWORD dwPortVal;
 +
GetPortVal(INTEL_DI, &dwPortVal,1 );
 +
return (BYTE)(dwPortVal);
 +
}
 +
 +
=== Enable/Disable WDT ===
 +
Enable : SetPortVal(INTEL_WDTE, m_CountDown, 1); // m_CountDown is timer of WDT
 +
Disable: GetPortVal(INTEL_WDTD,&dwPortVal,1);
 +
== The Sample code source you can download from ==
== The Sample code source you can download from ==
-
[ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/852_DIO_Sample_Windows/852_DIO_WDT.rar 852_DIO_WDT.rar]
+
=== For Looping test ===
 +
 
 +
( This sample code using WinIO.dll )
 +
 
 +
<Google Drive>
 +
 
 +
Source file: [https://drive.google.com/file/d/1QksUdVVbX-QpIVO96sA1nuTDaO4Ittis/view?usp=sharing 852_DIO_WDT_Src]
 +
 
 +
Binary file: [https://drive.google.com/file/d/1jUW7RyjTfMpstk9Z7fJtiQ4dYpJsluEi/view?usp=sharing 852_DIO_WDT_Bin]
 +
 
 +
<FTP>
 +
 
 +
Source file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/852_DIO_Sample_Windows/852_DIO_WDT.rar 852_DIO_WDT_Src]
 +
 
 +
Binary file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/852_DIO_Sample_Windows/852_DIO_WDT_Bin.rar 852_DIO_WDT_Bin]
 +
 
 +
=== For Single pin test ===
 +
 
 +
<Google Drive>
 +
 
 +
Source file: [https://drive.google.com/file/d/14Q8WRNev0HJ8uV1gXm9uIxVbDQ76R1G_/view?usp=sharing 852_DIO_WDT_Single_Src]
 +
 
 +
Binary file: [https://drive.google.com/file/d/1_xGejPDdoF-56i-vgA6wk1p0f8mUglev/view?usp=sharing 852_DIO_WDT_Single_Bin]
 +
 
 +
<FTP>
 +
 
 +
Source file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/852_DIO_Sample_Windows/852_DIO_WDT_Single_Src.rar 852_DIO_WDT_Single_Src]
 +
 
 +
Binary file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/852_DIO_Sample_Windows/852_DIO_WDT_Single_Bin.rar 852_DIO_WDT_Single_Bin]
== How to use this Demo Application ==
== How to use this Demo Application ==
-
1. Press the "Start" button to test DIO function
+
 
 +
=== For Looping test ===
 +
1. Press the "Start" button to test DIO function
2. Press the "Enable" button to test WDT function
2. Press the "Enable" button to test WDT function
Line 12: Line 70:
3. Press the "Disable" button when WDT enable to disable WDT
3. Press the "Disable" button when WDT enable to disable WDT
-
[[Image:.jpg]]
+
[[Image:DIO.jpg]]
-
== Introduction ==
+
=== For Single pin test ===
-
=== Initial Internal F75111 port address (0x9c)===
+
1. Connected the DI and DO pin
-
define GPIO1X, GPIO2X, GPIO3X to input or output
+
-
and Enable WDT function pin
+
-
=== Set F75111 DI/DO ( sample code as below Get Input value/Set output value )===
+
2. Before you press the "Write" button, Check the box what you like to send high data first
-
DO: InterDigitalOutput(BYTE byteValue))
+
-
DI: InterDigitalInput()
+
-
=== Enable/Disable WDT ===
+
3. Press the "Read" button to get data from DO
-
Enable : F75111_SetWDTEnable (BYTE byteTimer)
+
 
-
Disable: F75111_SetWDTDisable ()
+
4. Press the "Enable" button to test WDT function
 +
 
 +
5. Press the "Disable" button when WDT enable to disable WDT
 +
 
 +
[[Image:singlePin.jpg]]

Current revision


Contents

Introduction

Define Pin Address 

   #define INTEL_WDTE	0x600
   #define INTEL_WDTD	0x604
   #define INTEL_DI	0x608
   #define INTEL_DO	0x60C

Initialize WinIO & Uninitializ WinIO 

   InitializeWinIo()
   ShutdownWinIo()

Set DI/DO 

   DO: DIO_Write(BYTE dwDataVal)
       {
           SetPortVal(INTEL_DO, dwDataVal, 1);
       }
   DI: DIO_Read()
       {
           DWORD dwPortVal;
           GetPortVal(INTEL_DI, &dwPortVal,1 );
           return (BYTE)(dwPortVal);
       }

Enable/Disable WDT 

   Enable : SetPortVal(INTEL_WDTE, m_CountDown, 1);    // m_CountDown is timer of WDT 
   Disable: GetPortVal(INTEL_WDTD,&dwPortVal,1);


The Sample code source you can download from

For Looping test

( This sample code using WinIO.dll )

<Google Drive>

Source file: 852_DIO_WDT_Src

Binary file: 852_DIO_WDT_Bin

<FTP>

Source file: 852_DIO_WDT_Src

Binary file: 852_DIO_WDT_Bin

For Single pin test

<Google Drive>

Source file: 852_DIO_WDT_Single_Src

Binary file: 852_DIO_WDT_Single_Bin

<FTP>

Source file: 852_DIO_WDT_Single_Src

Binary file: 852_DIO_WDT_Single_Bin

How to use this Demo Application

For Looping test

1. Press the "Start" button to test DIO function

2. Press the "Enable" button to test WDT function

3. Press the "Disable" button when WDT enable to disable WDT

Image:DIO.jpg

For Single pin test

1. Connected the DI and DO pin

2. Before you press the "Write" button, Check the box what you like to send high data first

3. Press the "Read" button to get data from DO

4. Press the "Enable" button to test WDT function

5. Press the "Disable" button when WDT enable to disable WDT

Image:singlePin.jpg

Retrieved from "http://tprd.info/lexwiki/index.php/IO_Device:IntelDIO"
Personal tools