MB:SI852A

(Difference between revisions)

Current revision

O.S.	VGA	Audio	IDE	Video-in	TV-OUT	LAN	Download
Windows XP Embedded	Yes	Yes	Yes	Yes	Yes	VGA Audio Video-in	IDE Support and TV-OUT Support are Kernel build-in.
Windows CE 4.2	Yes	Yes	Yes	No	No	VGA Audio IDE	VGA could be built-in by Kernel
Windows CE 5.0	Yes	Yes	Yes	No	No	VGA & Audio & IDE	CI852xBSP.msi is a BSP
Ubuntu 7.10	Yes	Yes	Yes	Yes	No	Kernel build-in
Fedora Core 7	Yes	Yes	Yes	Yes	Yes	Kernel build-in
Ubuntu 8.04	Yes	Yes	Yes	Yes	Yes	Video-in Test Utility "xawtv",pls use the Apt command to got !! sudo apt-get install xawtv	All support by kernel
Fedora Core 9	Yes	Yes	Yes	Yes	Yes	Yes	Kernel built-in
Fedora Core 10	Yes	Yes	Yes	Yes	Yes	Yes	Kernel build-in

Ans:	Pls follow the fews steps to open your video-in devices!! 1.Make sure your video-in devices all supported by bttv driver Use the command $dmesg \|grep bttv you should be saw the message as red block !! 2.Make sure the Video-in modules have ready to supported use the command $lsmod you should be saw the message as red block!! 3.Got the test utility "xawtv" by Apt !! As command $sudo apt-get install xawtv the some dependences module also will be download,like "libzvbi-common" / "libzvbi0" / "pia" /"v4l-conf" . 4.Open your Video-in devices by xawtv if you want to open Video 1,Pls use the command $xawtv -c /dev/video0
Patch File:	$sudo apt-get install xawtv
Defect:	N/A
Asker:	Taipei / Leon.Hsu 2008/7/9
Provider:	Leon 2008/7/10

Ans:	We use the bttv devices driver and Xawtv project to test!! 1.Got the Xawtv $sudo apt-get install xawtv // for Ubuntu user $yum install xawtv //for Fedora user 2.Turn on your Video-in Devices $xawtv -c /dev/video0 // example for your channel 1 ,The channel 2 will be /dev/video1 3.Adjust your Video-in Devices As red block ,here you can setting your Video format like NTSC or PAL
Patch File:	$sudo apt-get install xawtv $yum install xawtv
Defect:	N/A
Asker:	Robert 2008 / 7 / 14
Provider:	Leon 2008 / 7 / 14

Ans:	1. using the tool " xawtv " 2. press right button on display frame to setting option 3. switch video source: ( check attached file ) Television as channel 1 Composite1 as channel 2 S-Video as channel 3 Composite3 as channel 4
Patch File:	apt-get install xawtv
Defect:	N/A
Asker:	Robert 2008/11/28
Provider:	Denny 2008/12/02

Ans:	In CentOS 5.0, you can get board temperature in dmesg. #dmesg \| grep Thermal About board voltage,use lm-sensors to find. #yum install lm_sensors.i386 lm_sensors-dev.i386 #sensors-detect #sensors
Patch File:	N/A
Defect:	N/A
Asker:	Patty 09:56, 23 February 2009 (CST)"writ Asker & date"
Provider:	Patty 09:56, 23 February 2009 (CST)"writ Provider & date"

Ans:	You will got asynchronous image when you load Bttv driver for BT878 capture function, It was Bttv driver bug cause of the error image Because Bttv driver can't auto-switch the BT878 register when you change to PAL model Thereby We should configure bttv driver correct parameter,Please follow the below procedure to done!! Remove the Bttv driver #rmmod bttv Reload the Bttv driver and provide the correct parameter for PAL #modprobe bttv pll=1,1,1,1 Run your capture application ,for example we used the xawtv #xawtv Select the PAL model
Patch File:	N/A
Defect:	N/A
Asker:	Robert 09/04/29
Provider:	Leon 09/04/29

@@ Line 176: / Line 176: @@
 ==  FAQ of SI852A ==
-=== How can I use the Video-in Function under Ubuntu 8.04 ? ===
+=== How can I use the Video-in Function under Ubuntu 8.04 and Ubuntu 9.10? ===
 {|
 !bgcolor = #ccccff width="50" align="center"|Ans:
@@ Line 212: / Line 212: @@
 |-
 |}
 === How can I adjust video-in devices? ===
 {|
@@ Line 308: / Line 309: @@
 |-
 |}
 === How to change the Video-in format to PAL model===
 {|