IO Device:852DioNTDriver version

From LEXWiKi

(Difference between revisions)
Jump to: navigation, search
(→Enable WDT)
Current revision (12:39, 25 February 2022) (edit) (undo)
(→The Sample code source you can download from)
 
(20 intermediate revisions not shown.)
Line 1: Line 1:
[[Category:AllowPages]]
[[Category:AllowPages]]
-
== Introduction ==
+
== Why to use NT driver version , not WinIO version ==
-
=== Define Pin Address ===
+
When using WinIO , only Administrator can read/write port.
-
#define WDT_ENABLE 0x600
+
-
#define WDT_DISABLE 0x604
+
-
#define DO 0x60C
+
-
#define DI 0x608
+
-
=== Set DO ===
+
But all of the user can read/write port when using the NT driver version.
-
DWORD dwOutput; //write data 1 to DO port
+
-
DWORD DoCheckLowBuffer[2] = { DO , 1 };
+
-
DeviceIoControl( hDevice , WRITE_PORT , DoCheckLowBuffer , sizeof(DoCheckLowBuffer) , NULL , 0 , &dwOutput , NULL);
+
-
=== Read DI/DO ===
+
Before using AP , please install the driver first.
-
DWORD DiCheckLowOutBuffer; //read DI data
+
-
DWORD DiCheckLowInBuffer[1] = { DI };
+
-
DeviceIoControl( hDevice , READ_PORT , DiCheckLowInBuffer , sizeof(DiCheckLowInBuffer) , &DiCheckLowOutBuffer ,
+
-
sizeof(DiCheckLowOutBuffer) , &dwOutput , NULL);
+
-
=== Enable WDT ===
+
== The Sample code source you can download from ==
-
DWORD WdtEnableBuffer[2] = { WDT_ENABLE , 5 }; //set 5 seconds to WDT enable port, system will reboot after 5 seconds
+
-
DeviceIoControl(hDevice, WRITE_PORT, WdtEnableBuffer , sizeof(WdtEnableBuffer), NULL, 0, &dwOutput, NULL);
+
-
=== Disable WDT ===
+
===For Looping test===
-
//set 1 sec to WDT disable port , the disable signal will break off WDT enable signle
+
-
DWORD WdtDisableBuffer[2] = { WDT_DISABLE , 1 };
+
-
DeviceIoControl(hDevice, WRITE_PORT, WdtDisableBuffer, sizeof(WdtDisableBuffer), NULL, 0, &dwOutput, NULL);
+
-
== The Sample code source you can download from ==
+
<Google Drive>
-
[ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/852_DIO_Sample_Windows/852Dio_v1.0w_NTdriver_src.rar 852Dio_v1.0w_NTdriver_src.rar]
+
Source file: [https://drive.google.com/file/d/1pT6tgTz8-aOpPpyX6XcVbn7MBQBLUMYu/view?usp=sharing 852Dio_NTdriver_v1.0W_Src]
-
[ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/852_DIO_Sample_Windows/852Dio_v1.0w_NTdriver_Bin.rar 852Dio_v1.0w_NTdriver_Bin.rar]
+
Binary file: [https://drive.google.com/file/d/1uT407l4X-WPw4_TnAS0HkR1sEfp9MwYa/view?usp=sharing 852Dio_NTdriver_v1.0W_Bin]
-
== How to install the NT driver ==
+
<FTP>
-
1. Download the installer [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/852_DIO_Sample_Windows/DriverInstaller.rar DriverInstaller.rar]
+
Source file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/852_DIO_Sample_Windows/852Dio_v1.0w_NTdriver_src.rar 852Dio_NTdriver_v1.0W_Src]
-
2. Double click the '''DriverInstaller.exe''' file.
+
Binary file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/852_DIO_Sample_Windows/852Dio_v1.0w_NTdriver_Bin.rar 852Dio_NTdriver_v1.0W_Bin]
-
3. After install the driver , OS will reboot automatically.
+
===For Single pin test===
-
4. After reboot , you can check if the driver install success or not by following steps.
+
<Google Drive>
 +
 
 +
Source file: [https://drive.google.com/file/d/18baDpQlqNgh1AiZYw8Od_ccTzy8oQZYY/view?usp=sharing 852Dio_single_NTdriver_Src]
 +
 
 +
Binary file: [https://drive.google.com/file/d/1xqlBaiyl5ebYOjo2YePIMHEYJkmhHXwr/view?usp=sharing 852Dio_single_NTdriver_Bin]
 +
 
 +
<FTP>
 +
 
 +
Source file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/852_DIO_Sample_Windows/852Dio_single_NTdriver_Src.rar 852Dio_single_NTdriver_Src]
 +
 
 +
Binary file: [ftp://ftp.lex.com.tw/Engineer/SoftSupport/AP_Module/852_DIO_Sample_Windows/852Dio_single_NTdriver_Bin.rar 852Dio_single_NTdriver_Bin]
 +
 
 +
== How to install the NT driver ==
 +
 
 +
1. Double click the '''DriverInstaller.exe''' file in 852Dio_v1.0w_NTdriver_Bin folder.
 +
 
 +
2. After install the driver , OS will reboot automatically.
 +
 
 +
3. After reboot , you can check if the driver install success or not by following steps.
[[Image:dev1.jpg]]
[[Image:dev1.jpg]]
Line 54: Line 56:
== How to use this Demo Application ==
== How to use this Demo Application ==
 +
=== For Looping test ===
1. Press the "Start" button to test DIO function
1. Press the "Start" button to test DIO function
Line 61: Line 64:
[[Image:852_dio_ap.jpg]]
[[Image:852_dio_ap.jpg]]
 +
 +
 +
=== For Single pin test ===
 +
1. Connected the DI and DO pin
 +
 +
2. Before you press the "Write" button, Check the box what you like to send high data first
 +
 +
3. Press the "Read" button to get data from DO
 +
 +
4. Press the "Enable" button to test WDT function
 +
 +
5. Press the "Disable" button when WDT enable to disable WDT
 +
 +
[[Image:singlePin.jpg]]
 +
 +
== Code Introduction ==
 +
=== Define Port Address ===
 +
#define WDT_ENABLE 0x600
 +
#define WDT_DISABLE 0x604
 +
#define DO 0x60C
 +
#define DI 0x608
 +
 +
=== Set DO ===
 +
DWORD dwOutput;
 +
DWORD DoCheckLowBuffer[2] = { DO , 1 };
 +
DeviceIoControl( hDevice , WRITE_PORT , DoCheckLowBuffer ,
 +
sizeof(DoCheckLowBuffer) , NULL , 0 , &dwOutput , NULL); //write data 1 to DO port
 +
 +
=== Read DI/DO ===
 +
DWORD DiCheckLowOutBuffer;
 +
DWORD DiCheckLowInBuffer[1] = { DI };
 +
DeviceIoControl( hDevice , READ_PORT , DiCheckLowInBuffer , sizeof(DiCheckLowInBuffer) , &DiCheckLowOutBuffer ,
 +
sizeof(DiCheckLowOutBuffer) , &dwOutput , NULL); //read DI data
 +
printf("%X\n" , DiCheckLowOutBuffer);
 +
 +
=== Enable WDT ===
 +
DWORD WdtEnableBuffer[2] = { WDT_ENABLE , 5 };
 +
DeviceIoControl(hDevice, WRITE_PORT, WdtEnableBuffer ,
 +
sizeof(WdtEnableBuffer), NULL, 0, &dwOutput, NULL); //set 5 seconds to WDT enable port, system will reboot after 5 seconds
 +
 +
=== Disable WDT ===
 +
//set 1 sec to WDT disable port , the disable signal will break off WDT enable signle
 +
DWORD WdtDisableBuffer[2] = { WDT_DISABLE , 1 };
 +
DeviceIoControl(hDevice, WRITE_PORT, WdtDisableBuffer, sizeof(WdtDisableBuffer), NULL, 0, &dwOutput, NULL);

Current revision


Contents

Why to use NT driver version , not WinIO version

When using WinIO , only Administrator can read/write port.

But all of the user can read/write port when using the NT driver version.

Before using AP , please install the driver first.

The Sample code source you can download from

For Looping test

<Google Drive>

Source file: 852Dio_NTdriver_v1.0W_Src

Binary file: 852Dio_NTdriver_v1.0W_Bin

<FTP>

Source file: 852Dio_NTdriver_v1.0W_Src

Binary file: 852Dio_NTdriver_v1.0W_Bin

For Single pin test

<Google Drive>

Source file: 852Dio_single_NTdriver_Src

Binary file: 852Dio_single_NTdriver_Bin

<FTP>

Source file: 852Dio_single_NTdriver_Src

Binary file: 852Dio_single_NTdriver_Bin

How to install the NT driver

1. Double click the DriverInstaller.exe file in 852Dio_v1.0w_NTdriver_Bin folder.

2. After install the driver , OS will reboot automatically.

3. After reboot , you can check if the driver install success or not by following steps.

Image:dev1.jpg

Open Device Manager,choose "show hidden devices"

Image:dev2.jpg

If there are 852Dio in Non-Plug and Play Drivers , the driver is installed success.

How to use this Demo Application

For Looping test

1. Press the "Start" button to test DIO function

2. Press the "Enable" button to test WDT function

3. Press the "Disable" button when WDT enable to disable WDT

Image:852_dio_ap.jpg


For Single pin test

1. Connected the DI and DO pin

2. Before you press the "Write" button, Check the box what you like to send high data first

3. Press the "Read" button to get data from DO

4. Press the "Enable" button to test WDT function

5. Press the "Disable" button when WDT enable to disable WDT

Image:singlePin.jpg

Code Introduction

Define Port Address 

   #define WDT_ENABLE 0x600
   #define WDT_DISABLE 0x604
   #define DO 0x60C
   #define DI 0x608

Set DO 

   DWORD dwOutput;  
   DWORD DoCheckLowBuffer[2] = { DO , 1 };
   DeviceIoControl( hDevice , WRITE_PORT , DoCheckLowBuffer , 
                    sizeof(DoCheckLowBuffer) , NULL , 0 , &dwOutput , NULL);  //write data 1 to DO port

Read DI/DO 

   DWORD DiCheckLowOutBuffer; 
   DWORD DiCheckLowInBuffer[1] = { DI };
   DeviceIoControl( hDevice , READ_PORT , DiCheckLowInBuffer , sizeof(DiCheckLowInBuffer) , &DiCheckLowOutBuffer , 
                           sizeof(DiCheckLowOutBuffer) , &dwOutput , NULL);  //read DI data
   printf("%X\n" , DiCheckLowOutBuffer);

Enable WDT 

   DWORD WdtEnableBuffer[2] = { WDT_ENABLE , 5 };   
   DeviceIoControl(hDevice, WRITE_PORT, WdtEnableBuffer , 
             sizeof(WdtEnableBuffer), NULL, 0, &dwOutput, NULL); //set 5 seconds to WDT enable port, system will reboot after 5 seconds

Disable WDT 

   //set 1 sec to WDT disable port , the disable signal will break off WDT enable signle
   DWORD WdtDisableBuffer[2] = { WDT_DISABLE , 1 }; 
   DeviceIoControl(hDevice, WRITE_PORT, WdtDisableBuffer, sizeof(WdtDisableBuffer), NULL, 0, &dwOutput, NULL);
Retrieved from "http://tprd.info/lexwiki/index.php/IO_Device:852DioNTDriver_version"
Personal tools