DPC Module:DPC Console under Linux

From LEXWiKi

(Difference between revisions)
Jump to: navigation, search
Line 7: Line 7:
== How to compile source code ==
== How to compile source code ==
-
#Download and install the Code::Block with command "apt-get install codeblocks"
+
*Compile source code with Code::Blocks
-
#Open an exist project(DPC_Console.cbp) in Code::Blocks, click the compile button
+
*#Download and install the Code::Block with command "apt-get install codeblocks" <br/>
 +
*#Open an exist project(DPC_Console.cbp) in Code::Blocks, click the compile button <br/>
 +
 
 +
*Compile source code with "make"
 +
*#cd DPC_Console <br/>
 +
*#key in command "make" <br/>
== How to use the DPC console application ==
== How to use the DPC console application ==

Revision as of 17:30, 28 May 2020

Contents

The Sample code source you can download form

Binary file:
???DPCv4.2.2W_bin.zip
???DPC_LightSensor_4.2.2W_bin.zip

How to compile source code

  • Compile source code with Code::Blocks
    1. Download and install the Code::Block with command "apt-get install codeblocks"
    2. Open an exist project(DPC_Console.cbp) in Code::Blocks, click the compile button
  • Compile source code with "make"
    1. cd DPC_Console
    2. key in command "make"

How to use the DPC console application

When the DPC utility starts, it will hide in the notification area (like below picture),
and double click the tray icon (shown as the red square below), 'DPC v3.0w.exe', it will show.

Image:DPC_AP_1.jpg

Image:DPCv4.1.8.jpg


1. Frequency of panel selection

2. Confirm the panel which selected

3. If you choose to save DPC setting , the setting of frequency and duty cycle will be reserved.

4. It will show the MCU version of DPC.

5. Brightness control , you can choose : 10,20,30,40,50,60,70,80,90,100.

6. Show the brightness data which you choose.

7. When click the LightOff button , the panel will become darkest.

8. Record mouse position for go to 50 when LightOff. If click the button , 13 will show , you can click anywhere which you want for light on.

9. Record hotkey for go to 10 when LightOff. If click the button , The Record Hot Key window will show.

10. When click minimized , DPC will hide and show in the notification area.

11. Reset the record of hot key and position.


Image:DPC_AP_3.jpg

12. The light on mouse position and hotkay can not use together , after you record hotkey , you can't use the position anymore.

Image:DPC_AP_4.jpg

13. First key of hotkey

15. Second key of hotkey

16. Third key hotkey

17. Confirm the hotkey which you entered

18. Show hotkey which you set.

19. Hotkey will show here.

Image:DPC_AP_5.jpg

20. If you want to exit DPC , you should click right button of mouse on the icon and choose exit.

Image:DPCv4.1.8.jpg

21. Check this grid program will automatically grab the light size to adjust the DPC light and dark

22. Showing the device name

23. Showing the mode in use

24. Showing the range in used

25. Showing calculated LUX values

26. Mode and Range detail settings

Image:DPCv4.1.5setting.jpg

27. Choose which mode to use

28. Choose which range to use

29. Custom DPC Max brightness

30. Set the DPC brightness intermediate reference value

31. Custom DPC Min brightness

32. Complete the settings button but without leaving the window

33. Complete the settings button and exit leaving the window

34. exit leaving the window


Sample code Introduction

Define SMBus regester

#define SMBUSPORT		0x0500
#define	HST_STS			SMBUSPORT+0x00
#define	HST_CNT			SMBUSPORT+0x02
#define	HST_CMD			SMBUSPORT+0x03
#define	XMIT_SLVA		SMBUSPORT+0x04
#define	HST_D0			SMBUSPORT+0x05
#define bSize			1
#define SADD			0xb0
#define PWMFeq			0x01
#define PWMDuty			0x02

Set Frequency data

DWORD dwPortVal;
bool bResult;
bResult = InitializeWinIo();

if (bResult){
     SetPortVal(HST_STS, 0xFE, bSize); //start
     Sleep(20);
     SetPortVal(XMIT_SLVA, SADD, bSize); //set
     Sleep(20);
     SetPortVal(HST_CMD, PWMFeq, bSize); //set frequency
     Sleep(20);
     GetPortVal(HST_STS, &dwPortVal, bSize);
     Sleep(20);
     dwPortVal = dwPortVal & 0x01;
     if (dwPortVal == 0){
          SetPortVal(HST_D0, fvalue, bSize); //write data into frequency
          Sleep(20);
          SetPortVal(HST_CNT, 0x48, bSize); //stop
          Sleep(20);
          ShutdownWinIo();
     }
     else
          ShutdownWinIo();
}
ShutdownWinIo();

Set Duty data

UpdateData(TRUE);
DWORD dwPortVal;
bool bResult;
bResult = InitializeWinIo();

if (bResult){
     SetPortVal(HST_STS, 0xFE, bSize); //start
     Sleep(20);
     SetPortVal(XMIT_SLVA, SADD, bSize); //set 
     Sleep(20);
     SetPortVal(HST_CMD, PWMDuty, bSize); //set duty
     Sleep(20);
     GetPortVal(HST_STS, &dwPortVal, bSize);
     Sleep(20);
     dwPortVal = dwPortVal & 0x01;
     if (dwPortVal == 0){
          if (inverter == false)
               SetPortVal(HST_D0, dvalue * 10 , bSize); //write data into data
          else if (inverter == true)
               SetPortVal(HST_D0, (10 - dvalue) * 10 , bSize); 
          Sleep(20);
   	   SetPortVal(HST_CNT, 0x48, bSize); //stop
          Sleep(20);
          ShutdownWinIo();
     }
     else
          ShutdownWinIo();
}
ShutdownWinIo();
Personal tools