WinCheck Introduce

From LEXWiKi

(Difference between revisions)
Jump to: navigation, search
(→It is show "Fail to retreve time from NTP server" or Sync time error when runing wincheck)
Line 1: Line 1:
[[Category:AllowPages]]
[[Category:AllowPages]]
 +
==最新版本下載位置==
 +
== WinCheck Instruction ==
== WinCheck Instruction ==
Test all function on MainBoard
Test all function on MainBoard

Revision as of 15:24, 20 May 2010

Contents

最新版本下載位置

WinCheck Instruction

Test all function on MainBoard (ex: Lan, COM, Audio...)

Image:WinCheck.jpg

Function Instruction

Setting

Records the user information and establishes Server IP (FTP Server, HTTP Server, NTP Server)

Hardware Monitor

Display hardware information After start of the test if this option was been checked.

Image:Monitor.jpg

Write CMOS

Write CMOS Setting

System Information 

 Display system information as below :
 1. BIOS
 2. CPU
 3. RAM
 4. HDD

NetWork Function Test 

 1. Verify MAC Address 
 2. Test 10/100 Mode TCP/UDP transmission 
 3. Test 1000 Mode TCP/UDP transmission 
 4. when WinCheck executed, adjust local time with NTP server by custmoize IP      
    ( If failured, show "Failed to retreive time from NTP server" dialog )

Image:lan.jpg

Connector Function Test

1. COM Port ( Rx/Tx Only, all ) 

  Pin Status Test
  Pin Control Test
  Transmitting Loop Test
  Baud Rate Test

Image:COM.jpg

2. LPT Port 

  Transmitting Loop Test

Image:LPT.jpg

Audio Function Test 

  Line-In Test ( Left )
  Line-In Test ( Right )
  Mic-In Test

  FI853A SPDIF Test

Image:Audio.jpg

DIO/WDT Function Test

Press WDT button will show another dialog. Select mainboard to test DIO function on this dialog.

Image:DIOWDT.jpg

Tarnasmitting Loop Test with DI/DO

Image:DO.jpg

Watch Dog Test 

 Show report dialog after all function tested. there's a "reboot" button below this dialog
 pressed this button, System will be reboot at 5 seconds later.

Image:WDT.jpg

WinCheck Report 

 Notice with buzzer after all function was finished test
 Successed : buzzer beeps 3 shorts after one long beep
 Failed    : one long beep
 Check Report dialog, green light means successed. red light means failed.

Image:report.jpg

FAQ

當開啟Wincheck欲同步作業系統時間，但卻顯示 "Fail to retreve time from NTP server" 或者同步到的時間是錯誤的

Ans:

1.請檢查Ethernet 連線是否正常，是否在同一網段內
2.請檢查工作管理員(Task Manager)裡面是否有"Ntpd.exe"，如果沒有則重新安裝NTP Server.
3.請參考附件(illustration.doc)內容，操作上述兩步驟

Patch File:

illustration.doc NTP Server

Defect:

"N/A"

Asker:

"Steve 2010/05/03"

Provider:

"Steve 2010/05/03"

Retrieved from "http://tprd.info/lexwiki/index.php/WinCheck_Introduce"
Personal tools