Key Pad Utility Windows

From LEXWiKi

(Difference between revisions)
Jump to: navigation, search
(→Get Keyboard wParam & lParam)
Line 33: Line 33:
}
}
</pre>
</pre>
-
== Initial internal '''F75111''' ==
+
=== Initial internal '''F75111''' ===
<pre>
<pre>
void CKey_Pad_utilityDlg::InitInternalF75111()
void CKey_Pad_utilityDlg::InitInternalF75111()
Line 42: Line 42:
}
}
</pre>
</pre>
-
==Get Digital Input==
+
===Get Digital Input===
<pre>
<pre>
BYTE F75111_GetDigital0 ()
BYTE F75111_GetDigital0 ()
Line 72: Line 72:
}</pre>
}</pre>
-
== Get Keyboard wParam & lParam ==
+
=== RunGetKeyThread ===
<pre>
<pre>
UINT RunGetKeyThread(LPVOID lParam)
UINT RunGetKeyThread(LPVOID lParam)
Line 186: Line 186:
}
}
}
}
 +
}
 +
}
 +
return 0;
 +
}
 +
</pre>
 +
 +
=== RunDIOThread ===
 +
<pre>
 +
UINT RunDIOThread(LPVOID lParam)
 +
{
 +
F75111_Init();
 +
CKey_Pad_utilityDlg *dlg=(CKey_Pad_utilityDlg *)lParam;
 +
 +
while(1)
 +
{
 +
char *temp=0;
 +
BYTE intputsignal=0;
 +
 +
intputsignal=F75111_GetDigital0();
 +
 +
while(1)
 +
if(intputsignal!=F75111_GetDigital0())
 +
break;
 +
switch(intputsignal)
 +
{
 +
 +
case 0x01:
 +
{
 +
dlg->execute(button1);
 +
break;
 +
}
 +
case 0x02:
 +
{
 +
dlg->execute(button2);
 +
break;
 +
}
 +
case 0x04:
 +
{
 +
dlg->execute(button3);
 +
break;
 +
}
 +
case 0x08:
 +
{
 +
dlg->execute(button4);
 +
break;
 +
}
 +
case 0x10:
 +
{
 +
dlg->execute(button5);
 +
break;
 +
}
 +
case 0x20:
 +
{
 +
dlg->execute(button6);
 +
break;
 +
}
 +
case 0x40:
 +
{
 +
dlg->execute(button7);
 +
break;
 +
}
 +
case 0x80:
 +
{
 +
dlg->execute(button8);
 +
break;
 +
}
}
}
}
}

Revision as of 17:13, 4 January 2013

Contents

The Sample code source you can download from

1.Binary file:Key_Pad_utility_bin_v1.0W(32bit).rarKey_Pad_utility_bin_v1.0W(64bit).rar
2.Source file:Key_Pad_utility_src_v1.0W(32bit).rarKey_Pad_utility_src_v1.0W(64bit).rar

How to Use The Utility

Image:key_pad_utility.jpg
Image:key_pad_recode.jpg

1.config
start set button or cecode
2.save
save button
3.setbutton
Settings button analog keyboard
4.recode
open new window to recode
5.Enter
the text you want to enter
6.finish
Complete text input

Introduction

Initial Internal F75111 port address (0x9c)

   define GPIO1X, GPIO2X, GPIO3X to input or output 
   and Enable WDT function pin

Set F75111 DI/DO ( sample code as below Get Input value/Set output value )

   DI: InterDigitalInput()

PULSE mode

Sample to setting GP33, 32, 31, 30 output 1mS low pulse signal. 

{ 
    this->Write_Byte(F75111_INTERNAL_ADDR, GPIO3X_PULSE_CONTROL,       0x00);             //This is setting low pulse output
    this->Write_Byte(F75111_INTERNAL_ADDR, GPIO3X_PULSE_WIDTH_CONTROL, 0x01);             //This selects the pulse width to 1mS
    this->Write_Byte(F75111_INTERNAL_ADDR, GPIO3X_CONTROL_MODE,        0x0F);             //This is setting the GP33, 32, 31, 30 to output function.    
    this->Write_Byte(F75111_INTERNAL_ADDR, GPIO3X_Output_Data ,        0x0F);             //This is setting the GP33, 32, 31, 30 output data.
}

Initial internal F75111 

void CKey_Pad_utilityDlg::InitInternalF75111()
{
    ::Write_Byte(F75111_INTERNAL_ADDR,GPIO1X_CONTROL_MODE  ,0x00);        //set GPIO1X to Input  function     
    ::Write_Byte(F75111_INTERNAL_ADDR,GPIO3X_CONTROL_MODE  ,0x00);        //set GPIO3X to Input  function
    ::Write_Byte(F75111_INTERNAL_ADDR,GPIO2X_CONTROL_MODE  ,0x00);        //set GPIO2X to Input function
}

Get Digital Input

BYTE F75111_GetDigital0 ()
{
	BYTE byteGPIO1X = 0;
	BYTE byteGPIO2X = 0;
	BYTE byteGPIO3X = 0;
	BYTE byteData   = 0;

	::SMBus_ReadByte(m_F75111.bAddress,GPIO1X_INPUT_DATA,&byteGPIO1X) ;
	::SMBus_ReadByte(m_F75111.bAddress,GPIO2X_INPUT_DATA,&byteGPIO2X) ;	
	::SMBus_ReadByte(m_F75111.bAddress,GPIO3X_INPUT_DATA,&byteGPIO3X) ;	

	byteGPIO1X = ~byteGPIO1X  & 0xF0;
	byteGPIO3X = ~byteGPIO3X  & 0x0F;
	byteGPIO2X = ~byteGPIO2X  & 0xFF;

	byteData = ( byteGPIO1X & 0x10 )? byteData + 0x01 : byteData ;
	byteData = ( byteGPIO2X & 0x80 )? byteData + 0x02 : byteData ;
	byteData = ( byteGPIO1X & 0x80 )? byteData + 0x04 : byteData ;	
	byteData = ( byteGPIO2X & 0x04 )? byteData + 0x08 : byteData ;

	byteData = ( byteGPIO1X & 0x40 )? byteData + 0x10 : byteData ;
	byteData = ( byteGPIO2X & 0x02 )? byteData + 0x20 : byteData ;
	byteData = ( byteGPIO3X & 0x01 )? byteData + 0x40 : byteData ;
	byteData = ( byteGPIO2X & 0x01 )? byteData + 0x80 : byteData ;

	return byteData;
}

RunGetKeyThread 

UINT RunGetKeyThread(LPVOID lParam)
{
	char StrTemp[3][16];
	int i,j,k,wParamtemp,lParamtemp;
	int StrSize=16,finish=0;
	CEdit *edittemp;
	CKey_Pad_utilityDlg *dlg=(CKey_Pad_utilityDlg *)lParam;
	start=1;
	switch (setbutton)
	{
		case 1:
			buttontemp = &button1;
			edittemp= &dlg->m_edit_recode1;
			break;
		case 2:
			buttontemp = &button2;
			edittemp= &dlg->m_edit_recode2;
			break;
		case 3:
			buttontemp = &button3;
			edittemp= &dlg->m_edit_recode3;
			break;
		case 4:
			buttontemp = &button4;
			edittemp= &dlg->m_edit_recode4;
			break;
		case 5:
			buttontemp = &button5;
			edittemp= &dlg->m_edit_recode5;
			break;
		case 6:
			buttontemp = &button6;
			edittemp= &dlg->m_edit_recode6;
			break;
		case 7:
			buttontemp = &button7;
			edittemp= &dlg->m_edit_recode7;
			break;
		case 8:
			buttontemp = &button8;
			edittemp= &dlg->m_edit_recode8;
			break;
	}
	while(start==1 )
	{
		if(KeyDownFlag==1)
		{
			wParamtemp=msgtemp1->wParam,lParamtemp=msgtemp1->lParam;
			while(1)
			{
				for( i=1;i<156;i++)
				{	
					for( j=1;j<156;j++)
					{
						for( k=1;k<156;k++)
						{
							if(i!=j && i!=k && j!=k )
							{								
								if( wParamtemp==i && cbuf[j]&0x80 && msgtemp1->wParam==k && (msgtemp1->message == WM_KEYDOWN || msgtemp1->message == WM_SYSKEYDOWN) )
								{
 									buttontemp->hotkey1.wParam = i;
									buttontemp->hotkey2.wParam = j;
									buttontemp->hotkey3.wParam = k;
									GetKeyNameText(MapVirtualKey(buttontemp->hotkey1.wParam,0) << 16,StrTemp[0],StrSize);
									GetKeyNameText(MapVirtualKey(buttontemp->hotkey2.wParam,0) << 16,StrTemp[1],StrSize);
									GetKeyNameText(MapVirtualKey(buttontemp->hotkey3.wParam,0) << 16,StrTemp[2],StrSize);
									strcat(StrTemp[0],"+"); 
									strcat(StrTemp[0],StrTemp[1]); 
									strcat(StrTemp[0],"+"); 
									strcat(StrTemp[0],StrTemp[2]); 
									edittemp->SetWindowTextA(StrTemp[0]);
									KeyDownFlag=0;
									start=0;
									memset(cbuf,0,sizeof(cbuf));
									return TRUE;
								}
								if( (cbuf[i]&0x80)==0x80 && (msgtemp1->wParam==j) && (msgtemp1->message == WM_KEYUP || msgtemp1->message == WM_SYSKEYUP) )
								{
									buttontemp->hotkey1.wParam = i;
									buttontemp->hotkey2.wParam = j;
									buttontemp->hotkey3.wParam = 0;
									
									GetKeyNameText(MapVirtualKey(buttontemp->hotkey1.wParam,0) << 16,StrTemp[0],StrSize);
									GetKeyNameText(MapVirtualKey(buttontemp->hotkey2.wParam,0) << 16,StrTemp[1],StrSize);
									strcat(StrTemp[0],"+"); 
									strcat(StrTemp[0],StrTemp[1]); 
									edittemp->SetWindowTextA(StrTemp[0]);
									KeyDownFlag=0;
									start=0;
									memset(cbuf,0,sizeof(cbuf));
									return TRUE;
								}
								if( wParamtemp==msgtemp1->wParam  && (msgtemp1->message == WM_KEYUP || msgtemp1->message == WM_SYSKEYUP) )
								{

									buttontemp->hotkey1.wParam = msgtemp1->wParam ;
									buttontemp->hotkey2.wParam = 0;
									buttontemp->hotkey3.wParam = 0;
									int y=GetOEMCP();
									int x=MapVirtualKey(buttontemp->hotkey1.wParam,0) ;
									GetKeyNameText(MapVirtualKey(buttontemp->hotkey1.wParam,0) << 16,StrTemp[0],StrSize);
									edittemp->SetWindowTextA(StrTemp[0]);
									KeyDownFlag=0;
									start=0;
									memset(cbuf,0,sizeof(cbuf));
									return TRUE;
								}
							}
						}
					}
				}
			}
		}
	}
	return 0;
}

RunDIOThread 

UINT RunDIOThread(LPVOID lParam)
{
	F75111_Init();
	CKey_Pad_utilityDlg *dlg=(CKey_Pad_utilityDlg *)lParam;

	while(1)
	{
		char *temp=0;
		BYTE intputsignal=0;
			
		intputsignal=F75111_GetDigital0();

		while(1)
			if(intputsignal!=F75111_GetDigital0())
				break;
		switch(intputsignal)
		{

			case 0x01:
				{
					dlg->execute(button1);
					break;
				}
			case 0x02:
				{
					dlg->execute(button2);
					break;
				}
			case 0x04:
				{
					dlg->execute(button3);
					break;
				}
			case 0x08:
				{
					dlg->execute(button4);
					break;
				}
			case 0x10:
				{
					dlg->execute(button5);
					break;
				}
			case 0x20:
				{
					dlg->execute(button6);
					break;
				}
			case 0x40:
				{
					dlg->execute(button7);
					break;
				}
			case 0x80:
				{
					dlg->execute(button8);
					break;
				}
		}
	}
	return 0;
}
Retrieved from "http://tprd.info/lexwiki/index.php/Key_Pad_Utility_Windows"
Personal tools