請先看『使用說明』

From LEXWiKi

The Sample code source you can download from

<FTP>

Source file: F81966_LPC_Utility_L_src

Binary file: F81966_LPC_Utility

F81966 Libary : libF81966_bin_x86_64

MB Support List

edit table

Introduction F81966 CIO

1. Use GET_CIO_INPUT to get the digital input data
2. Use SET_CIO_OUTPUT_DATA to set digital output data
3. Single bit setting can use SetCIOXBit0, SetCIOXBit1
4. Read a single bit using GetCIOXBit
5. Enable WDT and continuously reset WDT to ensure that the restart signal will not be triggered when the system is normal

libF81966.so Function

bool F81966_OPEN();
void F81966_Init();

BYTE GET_CIO_INPUT(int CIO_Number);
BYTE GET_CIO_OUTPUT_DATA(int CIO_Number);
BYTE SET_CIO_OUTPUT_DATA(int CIO_Number, BYTE byteValue);

BYTE GetCIOXBit(int CIO_Number, BYTE bitPosition);
BYTE SetCIOXBit0(int CIO_Number,BYTE byteValue, BYTE bitPosition);
BYTE SetCIOXBit1(int CIO_Number,BYTE byteValue, BYTE bitPosition);

void F81966_LPC_Set_WDT_Enable(BYTE byteValue);
void F81966_LPC_Set_WDT_Disable();

test_F81966 CIO Input/Ooutput

sample code

Set CIO1 Digital Output all bit low
test_F81966 write 0xf;


Set CIO2  Digital Output all bit low
test_F81966 write 2 0x0;

Set CIO3 Digital Output all bit high
test_F81966 write 3 0xf;

Get CIO4 Digital Input 
test_F81966 read 4;

read bit position
test_F81966 getbit 1 1

write bit position
test_F81966 setbit 1 0 1

Watch Dog test

sample code
test_F81966 getbit 1 1

Set WDT 10 sec
test_F81966 wdt enable 10;

Disable WDT
test_F81966 wdt disable;